Metal Pless PlowMaxx Snow Pusher for Skid Steers
Overview
The Metal Pless PlowMaxx is a commercial snow pusher designed for loaders and skid steers from 5,000 to 25,000 lbs, with model sizes scaled to match machine weight. Built in Quebec by Metal Pless, a leading Canadian snow management equipment manufacturer, the PlowMaxx features the patented LiveEdge cutting edge — a floating segmented edge that follows road and pavement imperfections, reducing salt and abrasive use by up to 50%. The compact design is suited to smaller contracts and tight areas. Available with hydraulic wings and angle options on larger models.
Canada Availability
Compare with: Arctic 12-Foot Box Snow Pusher for Skid Steers · Arctic Box Snow Pusher 16-Foot for Skid Steers · Arctic 6-Foot Box Snow Pusher for Skid Steers
Key Facts
- Machine compatibility: skid steers from approximately 5,000 lbs operating weight
- Patented LiveEdge cutting edge system — follows pavement imperfections
- Mobile steel trip edge — reduces salt use by up to 50%
- Compact format for small contracts and tight areas
- Sizes available to match machine operating weight from 5,000 to 25,000 lbs
- Optional hydraulic wings and angle on larger models
- Made in Quebec, Canada
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
See It in Action
Is This Right For You?
Buy if
- You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
- You don't have room or budget for a blower — pushers cost far less and maintain well
Skip if
- Your site has no windrow drop zone — pushers pile snow that has to go somewhere
- Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher
Also consider
- Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
- Snow blower attachment if bank height from repeated pushes is becoming a problem
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Metal Pless in Canada
Metal Pless is a Quebec manufacturer specializing in snow management equipment. Their snow blades, pushers, and winter maintenance products are designed specifically for Canadian conditions — heavy wet snow, freeze-thaw cycles, and the kind of winter that other brands' products weren't designed for. Metal Pless has a strong following among Canadian snow contractors.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
How to Connect
- Back machine into push frame receiver
- Lower boom to slide trip edges into receiver arms
- Engage mounting pins or latch
- Raise slightly off ground and test trip edge reset manually if accessible
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
Metal Pless PlowMaxx 96-Inch Snow Blade for Skid Steers
Standard FlowThe Metal Pless PlowMaxx is a 96-inch (8-foot) V-style or multi-configuration snow plow...
View product →
TMG-SB96 96-Inch Skid Steer Rotary Sweeper
Standard FlowThe 96-inch-inch broom clears paved surfaces, yards, and construction sites of loose...
View product →More from Metal Pless
Metal Pless 72-Inch Live Edge Carbide Snow Blade
Standard FlowMetal Pless's 6-11 Live Edge carbide blade is described by Langner Equipment as the...
View product → Metal Pless LE 84-Inch Snow Blade for Skid Steers
Standard FlowThe 84-inch-inch snow blade angles and pushes snow from laneways, yards, and parking areas...
View product → Metal Pless PlowMaxx 96-Inch Snow Blade for Skid Steers
Standard FlowThe Metal Pless PlowMaxx is a 96-inch (8-foot) V-style or multi-configuration snow plow...
View product →
Metal Pless ReverseMaxx 84-Inch Snow Blade for Skid Steers
Standard FlowThe Metal Pless ReverseMaxx is a specialized snow blade that allows the operator to pull...
View product →✓ Last checked: March 2026