Metal Pless LiveBoxx 8-Foot Skid Steer Snow Pusher

Name: Metal Pless LiveBoxx 8-Foot Skid Steer Snow Pusher
Brand: Metal Pless
SKU: metal-pless-liveboxx-snow-pusher-8ft
Availability: InStock

Premium

No hydraulics requiredFits most skid steers, including small-frame

View on langnerequipment.ca →

Metal Pless LiveBoxx 8-Foot Skid Steer Snow Pusher

Overview

The Metal Pless LiveBoxx is a snow pusher equipped with Metal Pless's patented Live Edge technology, allowing the blade to adapt to road and lot surface imperfections for complete surface contact on the first pass. The pusher configuration gives containment box performance with the live-edge surface clearing advantage. Distributed in Canada through Langner Equipment. Metal Pless is a Quebec-based Canadian manufacturer.

Canada Availability

Canadian-manufactured by Metal Pless (Quebec). Available through Langner Equipment and Metal Pless dealers in Canada.

Best for: commercial parking lots, roads

Compare with: Arctic Box Snow Pusher 7-Foot for Skid Steers · Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic 8-Foot Sectional Sno-Pusher Skid Steer

Key Facts

Working width: 8 feet
Type: snow pusher with Live Edge technology
Live Edge: adapts to surface imperfections for full-contact scraping
Application: commercial parking lots, roads
Canadian-manufactured by Metal Pless
SSQA universal quick attach
Typical weight: 450–580 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from langnerequipment.ca · Last verified: March 2026

View on langnerequipment.ca →View on metalpless.com →

See It in Action

Is This Right For You?

Buy if

You move snow on commercial or residential properties and want a high-volume, low-pass attachment
You already own a skid steer and want to add snow clearing without a dedicated machine

Skip if

Your site has no room for a windrow — pushers need a drop zone
You need to move snow over a distance or over a bank — a blower or truck setup handles that better

Also consider

Snow blower attachment if bank management is a regular issue
Snow blade if road clearing and angle control matter more than containment

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Metal Pless in Canada

Metal Pless is a Quebec manufacturer specializing in snow management equipment. Their snow blades, pushers, and winter maintenance products are designed specifically for Canadian conditions — heavy wet snow, freeze-thaw cycles, and the kind of winter that other brands' products weren't designed for. Metal Pless has a strong following among Canadian snow contractors.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below