John Deere Worksite Pro SP84 Snow Pusher

Name: John Deere Worksite Pro SP84 Snow Pusher
Brand: John Deere
SKU: jd-sp84-snow-pusher
Availability: InStock

Mid

No hydraulics requiredFits most skid steers, including small-frame

View on deere.com →

John Deere snow pusher attachment on a skid steer

Overview

An 84-inch snow pusher in John Deere's Worksite Pro line. The SP84 is sized for mid-frame skid steers and fits through standard parking lot drive lanes while still moving a useful volume of snow. Rubber cutting edge protects finished pavement and handles the frost heave irregularities common on Canadian commercial lots — a steel edge in those conditions catches and lifts the bucket rather than skimming. Available through Brandt dealers across Canada.

Canada Availability

Available in Canada through Brandt / John Deere Worksite Pro. Common on mid-frame skid steers used in Canadian commercial snow contracts.

Best for: commercial parking lots, sidewalks, site clearing, farm yards

Compare with: Arctic 6-Foot Box Snow Pusher for Skid Steers · Arctic Box Snow Pusher 7-Foot for Skid Steers · Arctic 8-Foot Sectional Sno-Pusher Skid Steer

Key Facts

Working width: 84 inches (213 cm)
Cutting edge: rubber — protects pavement, handles frost heaves
Application: commercial parking lots, sidewalks, site clearing, farm yards
Box design retains snow load for efficient transport to windrow
No hydraulics required
SSQA (universal skid steer quick attach) mount
Compatible with John Deere skid steers and compact track loaders
Typical weight: 450–580 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from deere.com · Last verified: March 2026

View on deere.com →View on brandt.ca →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Designed for John Deere machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.

About John Deere in Canada

John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below