John Deere 12-Foot Snow Pusher for Skid Steers

Name: John Deere 12-Foot Snow Pusher for Skid Steers
Brand: John Deere
SKU: john-deere-snow-pusher-12ft
Availability: InStock

Mid

No hydraulics requiredFits most skid steers, including small-frame

View on brandt.ca →

John Deere 12-Foot Snow Pusher skid steer attachment

Overview

The 12-foot-foot snow pusher clears large paved areas — parking lots, loading docks, industrial yards — in fewer passes than a bucket or blade. John Deere Worksite Pro attachments are stocked and supported by Brandt and John Deere dealers at over 100 locations across Canada. The sectional containment design keeps snow moving in front of the blade without spillover. Compatible with most mid-frame and large-frame skid steers via SSQA. Available in Canada through Brandt and John Deere Worksite Pro dealers.

Canada Availability

Available in Canada through Brandt and John Deere Worksite Pro dealers.

Best for: commercial lots, farm yards

Compare with: Arctic 12-Foot Box Snow Pusher for Skid Steers · Arctic Sectional Sno-Pusher 12-Foot Snow Pusher for Skid Steers · Arctic Snow and Ice 12 Foot Skid Steer Snow Pusher

Key Facts

Working width: 12 feet
Trip edge: yes
Application: commercial lots, farm yards
Mount: John Deere quik-tach / universal SSQA
Typical weight: 650–850 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from brandt.ca · Last verified: March 2026

View on brandt.ca →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About John Deere in Canada

John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below