HLA 2500 Series 8-Foot Snow Pusher

Mid

No hydraulics requiredFits most skid steers, including small-frame

Overview

HLA's 2500 series 8-foot snow pusher is the most popular mid-duty pusher in the HLA lineup for Canadian commercial operators on mid-frame skid steers. Includes back-drag bar as standard. Ontario-manufactured by Horst Welding in Listowel, Ontario, and stocked through Langner Equipment at approximately $3,800 CAD. The 8-foot width handles most commercial lot snow on machines in the 60-90 HP range.

Canada Availability

Ontario-manufactured by Horst Welding. Available through HLA dealers and Langner Equipment in Canada at approximately $3,800 CAD.

Best for: mid-frame machines, commercial lots, farm yards

Compare with: Arctic Box Snow Pusher 7-Foot for Skid Steers · Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic 8-Foot Sectional Sno-Pusher Skid Steer

Key Facts

Model: HLA 2500 Series 8'
Working width: 8 feet
Includes back-drag bar standard
Application: mid-frame machines, commercial lots, farm yards
Ontario-manufactured by Horst Welding (Listowel, ON)
SSQA skid steer quick attach
Typical weight: 450–580 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from hlaattachments.com · Last verified: March 2026

View on hlaattachments.com →View on langnerequipment.ca →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About HLA in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below