Erskine High Flow Skid Steer Brush Chipper
Overview
Erskine's high-flow brush chipper is designed for skid steers equipped with high-flow auxiliary hydraulics, pushing the chipping capacity to 8 inches — suitable for larger tree limbs and heavier clearing work. The larger 30-inch disc at 275 lbs provides the flywheel momentum needed to power through dense hardwood. Operates at 25-38 GPM at 3,000 PSI. The dual SSQA mount configuration allows parking the skid steer perpendicular or parallel to the chipper. Available through Canadian Erskine dealers.
Canada Availability
Compare with: Baumalight MP248 Standard-Flow Mulcher for Skid Steers · Baumalight MP248 Skid Steer Brush Mulcher · Baumalight MP260 96 Inch Mulcher
Key Facts
- Part number: 900791
- Chipper capacity: 8 inches
- Feed opening: 9" x 9"
- Feed system: independent hydraulic
- Chipper disc: 30" x 1.25"
- Disc weight: 275 lbs
- Operating weight: 1,525 lbs
- Hydraulic requirement: 25-38 GPM at 3,000 PSI (high flow)
- Case drain: required
- Mount: two universal SSQA plates
Is This Right For You?
Buy if
- You need to chip brush, limbs, and slash into transportable material rather than mulching in place
- Urban tree service, brush disposal contracts, or sites where leaving mulched material is unacceptable
- You want to produce usable wood chip material for landscaping or disposal
Skip if
- In-place mulching is acceptable — a drum mulcher processes faster without relocating the machine
- You're clearing large acreage where chip transport logistics don't make sense
Also consider
- Drum mulcher for in-place land clearing and brush processing
- Forestry mulcher for high-volume stand clearing where material stays on site
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Erskine in Canada
Erskine is a US attachment brand with Canadian dealer coverage, known particularly for augers, soil conditioners, and specialty attachments. Erskine products are available at equipment dealers across Canada and are respected for quality build and reliable performance.
Care & Maintenance
- Inspect carbide hammers or teeth before every use — missing or broken hammers unbalance the rotor and can cause catastrophic motor damage at high RPM
- Replace worn teeth in matched sets across the rotor — even one missing hammer creates vibration destructive enough to damage drive motor bearings
- Grease rotor shaft bearing housings every 4–8 hours of operation, or more frequently in dusty or abrasive conditions
- Clean packed fibrous material from the housing interior and rotor after every session — buildup adds asymmetric weight and creates rotor imbalance
- Check the hydraulic motor case drain line monthly for leakage — a restricted or failed case drain causes motor shaft seal failure and internal leakage
How to Connect
- Attach mulcher head using Bob-Tach
- Connect high-flow hydraulic couplers
- Verify rotor direction — debris should eject downward, not toward operator
- Run at idle for 30 seconds before engaging rotor at working speed
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Erskine
Erskine 1025PD Heavy-Duty Skid Steer Earth Auger
Standard FlowErskine's Model 1025PD is their heavy-duty skid steer earth auger drive unit, rated to...
View product →
Erskine 72-Inch Angle Broom for Skid Steers
Standard FlowErskine is a Minnesota-based attachment manufacturer with a solid Canadian dealer...
View product →
Erskine 84-Inch Landscape Rake for Skid Steers
Standard FlowThe 84-inch-inch power rake prepares seedbeds, collects surface rocks, and levels...
View product →
Erskine BCX Open Front Brush Cutter
High FlowErskine's BCX Open Front Brush Cutter is designed to cut, clear, and mulch brush, grass,...
View product →✓ Last checked: March 2026