Erskine 1025PD Heavy-Duty Skid Steer Earth Auger
Overview
Erskine's Model 1025PD is their heavy-duty skid steer earth auger drive unit, rated to 3,297 ft-lbs of maximum torque with a maximum speed of 72 RPM. It handles bit diameters up to 48 inches and works on both standard and high-flow machines (10–25 GPM). Erskine is ISO 9001:2015 certified and has distributed through Canadian dealers including GLC Equipment in Alberta and Timberland Supply in Edmonton. Compatible with 2-inch hex or 2-9/16-inch round drive shafts.
Canada Availability
Compare with: Baumalight 10 Inch Skid Steer Auger Bit · Baumalight 12 Inch Skid Steer Auger Bit · Baumalight 18 Inch Skid Steer Auger Bit
Key Facts
- Model: 1025PD
- Maximum torque: 3,297 ft-lbs (4,471 NM)
- Maximum speed: 72 RPM
- Hydraulic flow: 10–25 GPM
- Maximum pressure: 3,500 psi
- Maximum bit diameter: 48 inches
- Drive shaft: 2" hex or 2-9/16" round
- Operating weight: 317 lbs
See It in Action
Is This Right For You?
Buy if
- You already have an auger drive unit and need the right bit for your soil type or hole diameter
- You drill specific hole sizes for fence posts, footings, or tree planting and need diameter variety
Skip if
- You don't have an auger drive unit — a bit alone does nothing without a compatible drive motor
- Your soil is solid rock or hardpan — standard earth bits fail fast, you need a dedicated frost/rock bit
Also consider
- Rock or frost auger bit if your ground is caliche, Shield rock, or frozen Prairie soil
- Auger drive unit if you don't yet have one compatible with your machine's hydraulic flow
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Erskine in Canada
Erskine is a US attachment brand with Canadian dealer coverage, known particularly for augers, soil conditioners, and specialty attachments. Erskine products are available at equipment dealers across Canada and are respected for quality build and reliable performance.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
How to Connect
- Attach auger drive head using Bob-Tach
- Connect high-flow hydraulic couplers (colour-coded on most brands)
- Verify rotation direction — auger should rotate clockwise when viewed from above
- Lower auger to ground and test rotation at idle before digging
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Erskine
Erskine 72-Inch Angle Broom for Skid Steers
Standard FlowErskine is a Minnesota-based attachment manufacturer with a solid Canadian dealer...
View product →
Erskine High Flow Skid Steer Brush Chipper
High FlowErskine's high-flow brush chipper is designed for skid steers equipped with high-flow...
View product → Erskine Standard Flow Skid Steer Brush Chipper
Standard FlowErskine's standard flow skid steer brush chipper converts branch piles into chips on-site,...
View product →
Erskine 84-Inch Landscape Rake for Skid Steers
Standard FlowThe 84-inch-inch power rake prepares seedbeds, collects surface rocks, and levels...
View product →✓ Last checked: March 2026