Virnig V60 LCG84 Large Capacity Skeleton Grapple for Skid Steers
Overview
The Virnig V60 LCG84 is the 85-inch overall width model of Virnig's Large Capacity Skeleton Grapple series — the widest V60 LCG available. At 1,650 lbs, it requires machines with over 2,400 lb loader capacity. The 62.8-inch jaw opening handles large bulky loads — oversized logs, large debris piles, and bulk waste in single grabs. Built for heavy-duty demolition, land clearing, and industrial applications.
Canada Availability
Compare with: Berlon 78 Inch Grapple Bucket · Berlon 84-Inch Heavy-Duty Root Grapple · Berlon 78-Inch Root Grapple
Key Facts
- Model: LCG84
- Overall width: 85 inches
- Overall depth: 46 inches
- Tine spacing: 7.1 inches
- Grapple jaw opening: 62.8 inches
- Tine tip type: smooth
- Cylinders: 2
- Weight: approximately 1,650 lbs
- Recommended loader capacity: greater than 2,400 lbs
- Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Is This Right For You?
Buy if
- You handle large boulders, rip-rap, or irregular rock that a bucket can't safely grip
- You work in quarrying, shoreline work, or heavy land clearing
Skip if
- Your rock is small and uniform — a rock bucket moves volume faster
- You need to sort debris — a grapple with fingers works better for mixed piles
Also consider
- Industrial grapple for mixed debris with some rock
- Rock bucket if you're loading and moving more than sorting
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
- Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
- Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
- Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
- Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris
How to Connect
- Mount using same Bob-Tach process as buckets
- Connect hydraulic couplers (depressurized — release aux hydraulics first)
- Verify open/close direction at idle before working
- Test grapple open/close 3× before lifting any load
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Virnig
Virnig Skid Steer 4-in-1 Bucket
Standard FlowVirnig Manufacturing produces a 4-in-1 hydraulic combination bucket for skid steers....
View product →
Virnig 72-Inch Skid Steer Angle Broom
Standard FlowVirnig's 72-inch angle broom for full-size skid steers handles lot sweeping, spring road...
View product → Virnig 84-Inch Skid Steer Angle Broom
Standard FlowVirnig's 84-inch angle broom is a wide-format sweeper for large-frame skid steers used in...
View product → Virnig Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →✓ Last checked: March 2026