HLA High Volume Snow Bucket 60-Inch Skid Steer
Overview
HLA's 60-inch high volume snow bucket has a 38-inch depth and 32-inch height, moving large snow volumes per pass without the larger footprint of wider models. The reinforced round back and end plates improve durability and make clean-out easy. A flat top doubles as a level indicator for full-load monitoring. Beveled 3/4" x 4" cutting edge. Made in Canada and available through TAG Equipment and other Canadian HLA dealers.
Canada Availability
Compare with: Berlon 60-Inch General Purpose Bucket for Skid Steers · Berlon 72-Inch Heavy-Duty Smooth-Edge Skid Steer Bucket · Berlon 72-Inch Skid Steer Rock Bucket
Key Facts
- Width: 60 inches
- Depth: 38 inches
- Height: 32 inches
- Cutting edge: 3/4" x 4" beveled
- Material: 3/16" shell, 1/4" end plates
- Reinforced round back
- Flat top level indicator
- Made in Canada
- Typical weight: 350–450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
- You want more cubic yards per pass without exceeding your machine's weight limit
Skip if
- Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
- You need a bucket that doubles for digging or grading
Also consider
- GP bucket if you split time between light and heavy material
- Snow pusher if snow moving is your primary winter task
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
TMG-SG84 84-Inch Root Grapple for Skid Steers
Standard FlowThe TMG-SG84 is TMG Industrial's 84-inch root grapple — their widest standard tine grapple...
View product →
John Deere Worksite Pro HD60 Heavy Duty Pallet Forks
The HD60 is a 60-inch tine pallet fork set in John Deere's Worksite Pro heavy duty line —...
View product →More from HLA
HLA 3230 Snow Wing Blade 8 to 13-Foot Skid Steer
Standard FlowHLA's 3230 Snow Wing is a hydraulic wing snow blade that expands from 8 to 13 feet wide...
View product → HLA 3230 Snow Wing Blade 9 to 14-Foot Skid Steer
Standard FlowThe HLA 3230 Snow Wing in the 9-to-14-foot size class is suitable for larger skid steers...
View product →
HLA 72-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 4-in-1 grapple bucket combines a general-purpose bucket with a hydraulic clamshell...
View product → HLA 84-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 84-inch 4-in-1 grapple bucket is the larger size in their grapple bucket line,...
View product →✓ Last checked: March 2026