HLA HCM80 Large Capacity Concrete Mixer

Name: HLA HCM80 Large Capacity Concrete Mixer
Brand: HLA Attachments
SKU: hla-hcm80-cement-mixer
Availability: InStock

Mid

Standard Flow

Runs on standard auxiliary flowFits most skid steers, including small-frame

View on hlaattachments.com →

Overview

The HLA HCM80 is a large-capacity hydraulic concrete mixer for full-size skid steers, built in Ontario by HLA Attachments. It handles larger batch volumes for contractors pouring multiple footings or larger slabs on remote Canadian job sites. HLA's Canadian manufacturing ensures parts availability and service support across Canada.

Canada Availability

Canadian-manufactured by HLA Attachments (Ontario). Available through GLC Equipment and HLA dealers.

Best for: larger concrete pours, multi-footing work

Compare with: Berlon Industries Skid Steer Cement Mixer · Berlon Heavy Duty Skid Steer Cement Mixer · Blue Diamond Skid Steer Cement Mixer

Key Facts

Model: HLA HCM80
Capacity: large drum
Drive: hydraulic motor
Mount: universal SSQA quick attach
Manufacturer: HLA Attachments, Ontario, Canada
Application: larger concrete pours, multi-footing work
Weight: 500–1200 lbs
Hydraulic flow: 10–20 GPM

✓ Specs sourced from hlaattachments.com · Last verified: March 2026

View on hlaattachments.com →View on glcequipment.ca →

Is This Right For You?

Buy if

You pour continuous large batches — footings, columns, or multiple structures in sequence
Your crew does daily concrete work and needs a mixer that can keep up with demand all day
Large-frame skid steer with adequate hydraulic flow to power the drum continuously

Skip if

You pour occasional small batches — a standard mixer handles that without the extra weight and cost
Your machine is compact or mid-frame — a heavy mixer may exceed lift capacity with a full drum

Also consider

Standard cement mixer for occasional or small-batch concrete work
Concrete hopper for pour-only work where mixing is done elsewhere

Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.

About HLA Attachments in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time

How to Connect

Attach mixer frame using Bob-Tach
Connect hydraulic drum rotation circuit
Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
Verify drum is empty before connecting to machine

Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.