HLA 6 Inch Skid Steer Auger Bit
Overview
HLA Attachments manufactures a 6-inch auger bit for use with HLA auger drives on skid steers. Ontario-manufactured, HLA's bits are designed for Canadian soil conditions including clay-heavy Prairie and Shield soils. The 6-inch size handles small fence post holes and soil sampling. Available through GLC Equipment and HLA dealers.
Canada Availability
Best for: small fence posts, soil sampling, compact drilling
Compare with: Baumalight 10 Inch Skid Steer Auger Bit · Baumalight 12 Inch Skid Steer Auger Bit · Baumalight 18 Inch Skid Steer Auger Bit
Key Facts
- Brand: HLA Attachments
- Bit diameter: 6 inches
- Type: skid steer auger bit
- Manufacturer: Ontario, Canada
- Application: small fence posts, soil sampling, compact drilling
- Typical bit weight: 18–28 lbs
- Hydraulic flow: determined by auger drive unit (typically 15–30 GPM standard flow, 30–45 GPM high-flow for large drives)
Is This Right For You?
Buy if
- You already have an auger drive unit and need the right bit for your soil type or hole diameter
- You drill specific hole sizes for fence posts, footings, or tree planting and need diameter variety
Skip if
- You don't have an auger drive unit — a bit alone does nothing without a compatible drive motor
- Your soil is solid rock or hardpan — standard earth bits fail fast, you need a dedicated frost/rock bit
Also consider
- Rock or frost auger bit if your ground is caliche, Shield rock, or frozen Prairie soil
- Auger drive unit if you don't yet have one compatible with your machine's hydraulic flow
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About HLA Attachments in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
How to Connect
- Attach auger drive head using Bob-Tach
- Connect high-flow hydraulic couplers (colour-coded on most brands)
- Verify rotation direction — auger should rotate clockwise when viewed from above
- Lower auger to ground and test rotation at idle before digging
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from HLA Attachments
HLA Skid Steer Bale Grapple
Standard FlowHLA Attachments' bale grapple is designed for moving round and square bales across...
View product →
HLA 72 Inch Skid Steer Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
HLA Skid Steer Brush Grapple
Standard FlowHLA Attachments' brush grapple is a wide multi-tine hydraulic attachment for grabbing,...
View product →
HLA FM48 Skid Steer Flail Mower
High FlowThe HLA FM48 is a compact 48-inch flail mower built by HLA Attachments in Ontario for...
View product →✓ Last checked: March 2026