Virnig V50 72-Inch Utility Bucket for Skid Steers
Overview
Virnig Manufacturing's V50 72-inch utility bucket is a standard-flow general purpose bucket for mid-frame skid steers on earthmoving, gravel loading, and material handling tasks. Part of Virnig's V50 standard-flow series for standard skid steers. Heavy-duty construction with heat-treated wear edges for Canadian working conditions. Available through authorized Virnig dealers in Canada.
Canada Availability
Best for: earthmoving, gravel, material handling
Compare with: Berlon 60-Inch General Purpose Bucket for Skid Steers · Berlon 84-Inch GP Bucket for Skid Steers · Berlon 72-Inch Heavy-Duty Smooth-Edge Skid Steer Bucket
Key Facts
- Working width: 72 inches
- Model series: V50
- Type: utility / general purpose bucket
- Application: earthmoving, gravel, material handling
- Mount: universal skid steer quick attach (SSQA)
- Typical weight: 430–560 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You need one versatile bucket for gravel, soil, concrete chunks, and general debris
- Your machine is mid-frame (S450–S650 class) or CTL
Skip if
- You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
- You need clamshell/4-in-1 functionality
Also consider
- Rock bucket if your primary work is shot rock or frozen ground
- 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
TMG Industrial 84-Inch Skid Steer Skeleton Grapple
Standard FlowThe 84-inch-inch grapple handles logs, brush, rocks, scrap, and demolition debris on...
View product →
Kubota Heavy Duty Skid Steer Pallet Forks
The Kubota Heavy Duty Skid Steer Pallet Forks handles palletized loads, lumber bundles,...
View product →More from Virnig
Virnig 72-Inch Skid Steer Angle Broom
Standard FlowVirnig's 72-inch angle broom for full-size skid steers handles lot sweeping, spring road...
View product → Virnig 84-Inch Skid Steer Angle Broom
Standard FlowVirnig's 84-inch angle broom is a wide-format sweeper for large-frame skid steers used in...
View product → Virnig Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Virnig Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026