Kubota Heavy Duty Skid Steer Pallet Forks
Overview
The Kubota Heavy Duty Skid Steer Pallet Forks handles palletized loads, lumber bundles, and baled materials on Canadian farms, construction sites, and acreages. Kubota Canada dealer locations span every province, with factory-matched attachments and parts support. The wide-inch frame fits standard pallet widths, and the tines adjust to handle varied load sizes. SSQA mounting means the forks swap on in minutes without tools. Available through Kubota dealers across Canada.
Canada Availability
Best for: heavy construction and agricultural loads
Compare with: Berlon Skid Steer Lumber Forks · Berlon Industries 48-Inch Pallet Forks for Skid Steers · Berlon 60-Inch Pallet Forks for Skid Steers
Key Facts
- Brand: Kubota Tractor Corporation
- Type: heavy duty pallet forks
- Mount: Kubota quick attach (SSQA compatible)
- Application: heavy construction and agricultural loads
- Typical frame weight: 600–750 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
Buy if
- You lift pallets, bags, small bundles, or materials up to 4,000 lbs regularly
- Your machine is mid-frame (S450–S570 class) and typical loads are within standard-duty capacity
Skip if
- You regularly lift heavy or awkward loads over 5,000 lbs — standard-duty tines can bend under shock loads
- Bin moves, heavy concrete, or steel pipe are common — heavy-duty tines are worth the cost
Also consider
- Heavy-duty pallet forks if your load weights push the limit of the frame rating
- Fork frame carriage upgrade if you want a higher ITA carriage class for more lift capacity
Designed for Kubota machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Kubota in Canada
Kubota attachments are available through the Kubota dealer network across Canada, which covers most provinces. If you run Kubota compact equipment, same-brand attachments provide the best hydraulic compatibility and your local dealer handles both machine and attachment support under one roof.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Kubota
Kubota Skid Steer 4-in-1 Combination Bucket
Standard FlowKubota's 4-in-1 combination bucket is available for SSV and SVL series machines. Used by...
View product →
Kubota Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Kubota Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Kubota Skid Steer Cement Mixer Attachment
Standard FlowKubota's skid steer cement mixer is designed for SSV and SVL series machines, using the...
View product →✓ Last checked: March 2026