Virnig V60 60-Inch Angle Broom for Compact Skid Steers
Overview
The Virnig V60 60-inch angle broom sweeps sidewalks, driveways, and tight job sites on compact to mid-frame skid steers. Hydraulic angle adjusts 27° in either direction from the cab. Twenty-nine direct-drive poly/wire wafers (32-inch diameter) clean paved surfaces efficiently. At 970 lbs, it requires a loader capacity over 1,500 lbs. Requires standard hydraulic flow (15–25 GPM). Works for seasonal snow sweeping or year-round construction cleanup. Made by Virnig in Minnesota and available in Canada through their dealer network.
Canada Availability
Best for: compact machines, seasonal sweeping
Compare with: Berlon Industries 72-Inch Angle Broom for Skid Steers · Berlon 72-Inch Skid Steer Salt and Sand Spreader · Blue Diamond 60-Inch Angle Broom Skid Steer
Key Facts
- Working width: 60 inches
- Type: hydraulic angle broom
- Application: compact machines, seasonal sweeping
- Mount: universal SSQA
- Weight: 250–750 lbs
- Hydraulic flow: 15–25 GPM
See It in Action
Is This Right For You?
Buy if
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
Skip if
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
Also consider
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Virnig
Virnig Skid Steer 4-in-1 Bucket
Standard FlowVirnig Manufacturing produces a 4-in-1 hydraulic combination bucket for skid steers....
View product →
Virnig Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Virnig V50 72-Inch Skid Steer Brush Cutter
Standard FlowThe Virnig V50 72-inch brush cutter is a standard-deck rotary cutter for full-size skid...
View product →
Virnig Skid Steer Concrete Mixer
Standard FlowVirnig Manufacturing offers a concrete mixer attachment for full-size skid steers, built...
View product →✓ Last checked: March 2026