HLA Hydraulic Rotary Broom 72-Inch Skid Steer
Overview
HLA's 72-inch hydraulic rotary angle broom uses 26-inch diameter poly/steel wafers and a unique lateral and forward float to follow uneven surfaces. The broom angles 30 degrees left and right and includes an electric selector valve with hoses to auxiliary outlets. Reversible rotation for sweeping away from walls. Direct motor drive. Requires 12-20 GPM. Made in Canada and available through TAG Equipment and other HLA dealers.
Canada Availability
Compare with: Berlon Industries 72-Inch Angle Broom for Skid Steers · Berlon 72-Inch Skid Steer Salt and Sand Spreader · Blue Diamond 60-Inch Angle Broom Skid Steer
Key Facts
- Working width: 72 inches
- Brush diameter: 26 inches
- Brush type: poly/steel wafers
- Angle range: 30 degrees left and right
- Float: lateral and forward
- Electric selector valve: included
- Reversible rotation: yes
- Hydraulic requirements: 12-20 GPM
- Gauge wheels: yes
- Made in Canada
Is This Right For You?
Buy if
- You need a fast, wide sweep of light debris on open hard surfaces
- Speed and coverage area matter more than containment
Skip if
- You need the debris to go a specific direction — a rotary broom's discharge is less directional than an angle broom
- Fine material on wet surfaces may not clear as effectively
Also consider
- Angle broom for directional sweeping and windrow control
- Pickup broom if material collection matters
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from HLA
HLA 3230 Snow Wing Blade 8 to 13-Foot Skid Steer
Standard FlowHLA's 3230 Snow Wing is a hydraulic wing snow blade that expands from 8 to 13 feet wide...
View product → HLA 3230 Snow Wing Blade 9 to 14-Foot Skid Steer
Standard FlowThe HLA 3230 Snow Wing in the 9-to-14-foot size class is suitable for larger skid steers...
View product →
HLA 72-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 4-in-1 grapple bucket combines a general-purpose bucket with a hydraulic clamshell...
View product → HLA 84-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 84-inch 4-in-1 grapple bucket is the larger size in their grapple bucket line,...
View product →✓ Last checked: March 2026