Sweepster 60-Inch Pickup Broom for Skid Steers
Overview
Sweepster's 60-inch pickup broom combines a hydraulic sweeping head with an integrated collection hopper that captures and stores swept debris rather than windrowing it. This makes it ideal for indoor sweeping, clean-room environments, and locations where windrow debris is problematic. The 60-inch size is suited for warehouse aisles, indoor construction, and tight commercial spaces in Canada. Available through authorized Sweepster dealers.
Canada Availability
Best for: indoor construction, warehouse floors, tight commercial areas
Compare with: Berlon Industries 72-Inch Angle Broom for Skid Steers · Berlon 72-Inch Skid Steer Salt and Sand Spreader · Blue Diamond 60-Inch Angle Broom Skid Steer
Key Facts
- Working width: 60 inches
- Type: pickup broom with integral debris hopper
- Application: indoor construction, warehouse floors, tight commercial areas
- Drive: hydraulic motor
- Feature: debris collected into hopper, not windrowed
- Weight: 250–750 lbs
- Hydraulic flow: 20–30 GPM
Is This Right For You?
Buy if
- You need to collect material into a hopper, not just push it aside — cleanup is contained in one pass
- You're cleaning surfaces where side-casting would create a secondary mess (near curbs, drainage, sensitive areas)
Skip if
- Capacity is the issue — hopper fills faster than a windrow, meaning more dump cycles on large jobs
- The attachment weight of a pickup broom is a concern on smaller machines (1,100+ lbs loaded hopper)
Also consider
- Angle broom for high-speed open-area cleanup where windrow isn't an issue
- Sweeper with water tank if dust suppression is needed
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Sweepster in Canada
Sweepster is part of the Paladin/Epiroc family and is one of the most recognized names in angle brooms for skid steers. Sweepster brooms are available through Canadian equipment dealers and are a proven choice for municipal, commercial, and construction sweeping applications.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Sweepster
Sweepster 215 Pickup Broom Skid Steer Sweeper
Standard FlowSweepster's 215 series pickup broom collects and contains debris in a hopper for disposal...
View product →
Sweepster 60-Inch Angle Broom for Compact Skid Steers
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → Sweepster 72-Inch Angle Broom for Skid Steers
Standard FlowSweepster is a North American sweeper specialist with decades of experience in commercial...
View product → Sweepster 84-Inch Angle Broom for Skid Steers
Standard FlowSweepster's 84-inch angle broom is a wide-format hydraulic sweeping attachment for...
View product →✓ Last checked: March 2026