Sweepster Hydraulic Angle Broom Skid Steer
Overview
Sweepster's hydraulic angle broom is a Paladin Attachments product for sweeping construction sites, parking lots, and seasonal road sand. The hydraulic angle adjustment lets the operator change sweep direction without leaving the cab. Stocked through Langner Equipment in Canada and regularly offered as a sale item. A standard-flow attachment compatible with most skid steers.
Canada Availability
Best for: construction sites, parking lots, road sand sweeping
Compare with: Berlon Industries 72-Inch Angle Broom for Skid Steers · Berlon Skid Steer Angle Broom · Berlon 72-Inch Skid Steer Salt and Sand Spreader
Key Facts
- Type: hydraulic angle broom
- Hydraulic angle adjustment without leaving cab
- Drive: standard hydraulic flow
- Application: construction sites, parking lots, road sand sweeping
- Brand: Sweepster (Paladin Attachments)
- SSQA universal quick attach
Is This Right For You?
Buy if
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
Skip if
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
Also consider
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Sweepster in Canada
Sweepster is part of the Paladin/Epiroc family and is one of the most recognized names in angle brooms for skid steers. Sweepster brooms are available through Canadian equipment dealers and are a proven choice for municipal, commercial, and construction sweeping applications.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Sweepster
Sweepster 215 Pickup Broom Skid Steer Sweeper
Standard FlowSweepster's 215 series pickup broom collects and contains debris in a hopper for disposal...
View product →
Sweepster 60-Inch Angle Broom for Compact Skid Steers
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → Sweepster 72-Inch Angle Broom for Skid Steers
Standard FlowSweepster is a North American sweeper specialist with decades of experience in commercial...
View product → Sweepster 84-Inch Angle Broom for Skid Steers
Standard FlowSweepster's 84-inch angle broom is a wide-format hydraulic sweeping attachment for...
View product →✓ Last checked: March 2026