John Deere Worksite Pro BR60 Rotary Broom
Overview
The BR60 is a 60-inch rotary broom — the lightest and most compact broom in the Worksite Pro lineup at 750 lb. Rotary brooms spin a cylindrical brush to sweep material forward and to one side without hydraulic angle adjustment, making them simpler and lower-cost than angle brooms. The BR60 fits compact skid steers and CTLs working tight spaces: narrow lanes, paths between buildings, walkways. When a job calls for sweeping in a consistent direction in a confined area and budget matters, this is where the rotary broom earns its place over the heavier angle broom options.
Canada Availability
Best for: narrow lanes, paths, walkways, tight access areas
Compare with: Berlon Industries 72-Inch Angle Broom for Skid Steers · Berlon 72-Inch Skid Steer Salt and Sand Spreader · Blue Diamond 60-Inch Angle Broom Skid Steer
Key Facts
- Sweeping width: 60 inches
- Brush diameter: 25 inches
- Weight: 750 lb
- Type: rotary broom — cylindrical brush, sweeps without hydraulic angle adjustment
- Application: narrow lanes, paths, walkways, tight access areas
- SSQA (universal skid steer quick attach) mount
- Compatible with compact skid steers and compact track loaders
Is This Right For You?
Buy if
- You need a fast, wide sweep of light debris on open hard surfaces
- Speed and coverage area matter more than containment
Skip if
- You need the debris to go a specific direction — a rotary broom's discharge is less directional than an angle broom
- Fine material on wet surfaces may not clear as effectively
Also consider
- Angle broom for directional sweeping and windrow control
- Pickup broom if material collection matters
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from John Deere
John Deere Worksite Pro 4-in-1 Combination Bucket
Standard FlowJohn Deere's Worksite Pro 4-in-1 bucket is a hydraulic combination attachment for John...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product → John Deere 36-Inch Auger for Skid Steers in Canada
High FlowThe 36-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product → John Deere CM48B Cement Mixer
Standard FlowThe John Deere CM48B is a smaller-capacity cement mixer in John Deere's Worksite Pro...
View product →✓ Last checked: March 2026