John Deere Worksite Pro BA84 Angle Broom

Mid
Standard Flow
Runs on standard auxiliary flow
View on brandt.ca →
John Deere angle broom attachment on a skid steer

Overview

The BA84 is the larger angle broom in the Worksite Pro lineup — 84 inches wide, 32-inch brush diameter, 1,200 lb. It covers more ground per pass than the BA72 and suits larger mid-frame or large-frame skid steers working commercial lots, road maintenance, and construction cleanup. Like the BA72, it hydraulically angles to sweep material continuously into a windrow to one side; the operator keeps moving rather than stopping to reposition. For jobs where material can't be side-cast — parking garages, enclosed spaces — the BP84 pickup broom is the right choice instead.

Canada Availability

Available in Canada through Brandt / John Deere Worksite Pro — dealer locations in BC, AB, SK, MB, and ON.

Best for: large commercial lots, road maintenance, construction site cleanup

Compare with: Berlon Industries 72-Inch Angle Broom for Skid Steers · Berlon 72-Inch Skid Steer Salt and Sand Spreader · Blue Diamond 72-Inch Angle Broom for Skid Steers

Key Facts

  • Sweeping width: 84 inches
  • Brush diameter: 32 inches
  • Weight: 1,200 lb
  • Type: angle broom — sweeps material to the side
  • Angle: hydraulic adjustment
  • Application: large commercial lots, road maintenance, construction site cleanup
  • SSQA (universal skid steer quick attach) mount
Specs sourced from brandt.ca · Last verified: March 2026

Is This Right For You?

Buy if

  • You need to collect material into a hopper, not just push it aside — cleanup is contained in one pass
  • You're cleaning surfaces where side-casting would create a secondary mess (near curbs, drainage, sensitive areas)

Skip if

  • Capacity is the issue — hopper fills faster than a windrow, meaning more dump cycles on large jobs
  • The attachment weight of a pickup broom is a concern on smaller machines (1,100+ lbs loaded hopper)

Also consider

  • Angle broom for high-speed open-area cleanup where windrow isn't an issue
  • Sweeper with water tank if dust suppression is needed
Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.

About John Deere in Canada

John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.

Care & Maintenance

  • Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
  • Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
  • Grease drum bearing end caps monthly during active use periods
  • Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
  • Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality

How to Connect

  1. Attach broom frame using Bob-Tach
  2. Connect hydraulic couplers for rotation motor
  3. Verify rotation direction (forward-sweep or reverse-sweep per job)
  4. Adjust broom angle if applicable — most have manual tilt adjust
Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026