HLA 84-Inch Hydraulic Rotary Angle Broom for Skid Steers

Mid
Standard Flow
Runs on standard auxiliary flow
View on glcequipment.ca →
HLA 84-Inch Hydraulic Rotary Angle Broom for Skid Steers

Overview

HLA Attachments' 84-inch hydraulic rotary angle broom is a direct-drive sweeper made in Ontario for Canadian conditions. The broom angles up to 30 degrees left and right, sweeping material to either side — useful for clearing parking lots, construction sites, and road shoulders. A 26-inch diameter brush with 50/50 poly-steel bristles handles mixed debris, spring road sand, and loose aggregate. Lateral and forward float allows the broom to follow uneven surfaces without operator adjustment. Hydraulic requirements of 12–20 GPM at 1,500–3,000 PSI suit most skid steers.

Canada Availability

Available in Canada through HLA Attachments dealers including GLC Equipment. Ontario-manufactured by Horst Welding.

Key Facts

  • Working width: 84 inches
  • Brush diameter: 26 inches
  • Hydraulic angle: 30° left and right
  • Hydraulic requirements: 12–20 GPM @ 1,500–3,000 PSI
  • Bristles: 50/50 poly-steel (all-poly optional)
  • Drive: direct hydraulic motor
  • Lateral and forward float for uneven surface following
  • Includes gauge wheels
  • Includes hydraulic hoses and flat-faced couplers
  • SSQA skid steer quick attach mount
Specs sourced from glcequipment.ca · Last verified: March 2026

Is This Right For You?

Buy if

  • You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
  • Spring road sand cleanup in Canadian parking lots is a core task for your machine

Skip if

  • You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
  • Fine dust or regulated material (silica) requires containment — an angle broom disperses it

Also consider

  • Pickup broom if you need to collect material rather than side-cast it
  • Street sweeper or vacuum attachment if dust control is a regulatory requirement
Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.

About HLA in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

  • Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
  • Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
  • Grease drum bearing end caps monthly during active use periods
  • Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
  • Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality

How to Connect

  1. Attach broom frame using Bob-Tach
  2. Connect hydraulic couplers for rotation motor
  3. Verify rotation direction (forward-sweep or reverse-sweep per job)
  4. Adjust broom angle if applicable — most have manual tilt adjust
Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026