Erskine Attachments Skid Steer Pickup Broom
Overview
Erskine Attachments produces a pickup broom for skid steers that collects swept debris into an onboard hopper rather than just pushing it to the side. Built to Erskine's heavy-gauge Canadian standards. Used for construction site cleanup and municipal sweeping where debris collection is required. Available through Erskine's Canadian dealer network.
Canada Availability
Best for: construction cleanup, municipal sweeping with debris collection
Compare with: Berlon Industries 72-Inch Angle Broom for Skid Steers · Berlon Skid Steer Angle Broom · Berlon 72-Inch Skid Steer Salt and Sand Spreader
Key Facts
- Brand: Erskine Attachments
- Type: hydraulic pickup broom with debris hopper
- Drive: hydraulic brush motor
- Feature: debris collection hopper
- Mount: universal SSQA quick attach
- Application: construction cleanup, municipal sweeping with debris collection
- Weight: 300–900 lbs
- Hydraulic flow: 20–30 GPM
Is This Right For You?
Buy if
- You need to collect material into a hopper, not just push it aside — cleanup is contained in one pass
- You're cleaning surfaces where side-casting would create a secondary mess (near curbs, drainage, sensitive areas)
Skip if
- Capacity is the issue — hopper fills faster than a windrow, meaning more dump cycles on large jobs
- The attachment weight of a pickup broom is a concern on smaller machines (1,100+ lbs loaded hopper)
Also consider
- Angle broom for high-speed open-area cleanup where windrow isn't an issue
- Sweeper with water tank if dust suppression is needed
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Erskine Attachments in Canada
Erskine is a US attachment brand with Canadian dealer coverage, known particularly for augers, soil conditioners, and specialty attachments. Erskine products are available at equipment dealers across Canada and are respected for quality build and reliable performance.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Erskine Attachments
Erskine Attachments 4-in-1 Skid Steer Bucket
Standard FlowThe wide-inch bucket is purpose-built for skid steers and compact track loaders working in...
View product →
Erskine Attachments Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Erskine 60 Inch Skid Steer Brush Chipper
High FlowErskine Attachments' 60-inch brush chipper is a hydraulic drum chipper for compact and...
View product →
Erskine Attachments Skid Steer Concrete Mixer
Standard FlowErskine Attachments produces a hydraulic drum concrete mixer for skid steers, built to...
View product →✓ Last checked: March 2026