Blue Diamond 72 Inch Skid Steer Angle Broom

Premium
Standard Flow
Runs on standard auxiliary flowFits most skid steers, including small-frame
View on bluediamondattachments.com →
Blue Diamond 72 Inch Skid Steer Angle Broom

Overview

Blue Diamond's 72-inch angle broom is a wide hydraulic sweeper for full-size skid steers doing construction cleanup and municipal sweeping. Blue Diamond has a strong Canadian dealer network through Tag Equipment. The 72-inch width reduces sweeping passes for more efficient site cleanup.

Canada Availability

Available in Canada through Blue Diamond dealers including Tag Equipment.

Key Facts

  • Brand: Blue Diamond Attachments
  • Working width: 72 inches
  • Type: hydraulic angle broom
  • Drive: hydraulic brush motor with angle
  • Mount: universal SSQA quick attach
  • Weight: 300–900 lbs
  • Hydraulic flow: 15–25 GPM
Specs sourced from bluediamondattachments.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
  • Spring road sand cleanup in Canadian parking lots is a core task for your machine

Skip if

  • You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
  • Fine dust or regulated material (silica) requires containment — an angle broom disperses it

Also consider

  • Pickup broom if you need to collect material rather than side-cast it
  • Street sweeper or vacuum attachment if dust control is a regulatory requirement
Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.

About Blue Diamond Attachments in Canada

Blue Diamond Attachments is a US manufacturer with solid distribution through Canadian dealers. They cover a wide range of attachment categories and are particularly well-regarded for soil conditioners, power rakes, and forestry equipment. Blue Diamond products are available at equipment dealers across most Canadian provinces.

Care & Maintenance

  • Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
  • Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
  • Grease drum bearing end caps monthly during active use periods
  • Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
  • Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality

How to Connect

  1. Attach broom frame using Bob-Tach
  2. Connect hydraulic couplers for rotation motor
  3. Verify rotation direction (forward-sweep or reverse-sweep per job)
  4. Adjust broom angle if applicable — most have manual tilt adjust
Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026