Gehl 36 Inch Skid Steer Trencher
Overview
The 36-inch-inch chain trencher cuts utility, irrigation, and drainage trenches in Canadian soil. Gehl attachments are available through Canadian equipment dealers and distributors. Tungsten carbide teeth handle hard clay, gravel, and rocky sub-soil that disc trenchers struggle with. Trench width and depth capacity depend on the selected chain configuration. Available through Gehl (Manitou Group) dealers across Canada.
Canada Availability
Best for: utility installation, irrigation
Compare with: Baumalight TR418 36-Inch Trencher for Skid Steers · Baumalight TR418 Skid Steer Trencher · Baumalight TR418 Skid Steer Trencher — 24-Inch Depth
Key Facts
- Brand: Gehl (Manitou Group)
- Trench depth: 36 inches
- Type: chain trencher
- Drive: hydraulic chain drive
- Mount: Gehl quick attach (SSQA compatible)
- Application: utility installation, irrigation
- Weight: 550–1600 lbs
- Hydraulic flow: 15–30 GPM
Is This Right For You?
Buy if
- You trench through soft to moderate soil for utilities, drainage, or irrigation lines at 36–60 inch depth
- Your soil is clay, loam, sandy loam, or river bottom — chain trenchers cut fast in these conditions
Skip if
- Your soil is solid rock, dense caliche, or Shield granite — chain links and sprockets wear out fast in rock
- You trench in deeply frozen Prairie ground regularly — rock chain at 3–5× wear rate makes winter trenching expensive
Also consider
- Rock wheel trencher if your ground is consistently rocky or hardpan
- Standard auger if you're drilling individual holes rather than continuous trench lines
Designed for Gehl machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Gehl in Canada
Gehl is a US equipment and attachment manufacturer with Canadian dealer coverage. Gehl attachments are designed to pair with their skid steer line but are compatible with other machines. Gehl dealers are present in most Canadian provinces and can support both machine and attachment service.
Care & Maintenance
- Inspect chain teeth after every use — worn teeth slow penetration dramatically and increase drive motor load; a full day's work can dull a chain in abrasive soil
- Lubricate the drive chain and boom sprockets before each use and again after every 4 hours of continuous trenching
- Check the boom bar for cracking or deformation after work in rocky or abrasive conditions — boom cracks propagate quickly under the bending loads of trenching
- Clean soil from the drive motor cooling fins and chain case after summer use — compacted soil on the motor causes overheating on long cuts
- Store the chain with teeth protected from ground contact — resting a chain on carbide tips on concrete chips the teeth before you've even used it
How to Connect
- Attach trencher boom using Bob-Tach
- Connect high-flow hydraulic couplers
- Test chain tension and direction before cutting
- Call 811 and verify all utilities located before first cut
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Gehl
Gehl Skid Steer 4-in-1 Combination Bucket
Standard FlowThe wide-inch bucket is purpose-built for skid steers and compact track loaders working in...
View product →
Gehl Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Gehl Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Gehl Skid Steer Cement Mixer Attachment
Standard FlowGehl's skid steer cement mixer (Gehl is part of Manitou Group) is engineered for Gehl...
View product →✓ Last checked: March 2026