Berlon 48-Inch Trencher for Skid Steers
Overview
The 48-inch-inch chain trencher cuts utility, irrigation, and drainage trenches in Canadian soil. Berlon Industries attachments are available through select Canadian equipment dealers and online with shipping to most provinces. Tungsten carbide teeth handle hard clay, gravel, and rocky sub-soil that disc trenchers struggle with. Trench width and depth capacity depend on the selected chain configuration. Available in Canada through Berlon dealers.
Canada Availability
Best for: utility, irrigation, drainage
Compare with: Baumalight TR418 36-Inch Trencher for Skid Steers · Baumalight TR418 Skid Steer Trencher · Baumalight TR418 Skid Steer Trencher — 24-Inch Depth
Key Facts
- Trench depth: 48 inches
- Drive: hydraulic
- Application: utility, irrigation, drainage
- Mount: universal SSQA
- Weight: 550–1600 lbs
- Hydraulic flow: 15–30 GPM
Is This Right For You?
Buy if
- You trench through soft to moderate soil for utilities, drainage, or irrigation lines at 36–60 inch depth
- Your soil is clay, loam, sandy loam, or river bottom — chain trenchers cut fast in these conditions
Skip if
- Your soil is solid rock, dense caliche, or Shield granite — chain links and sprockets wear out fast in rock
- You trench in deeply frozen Prairie ground regularly — rock chain at 3–5× wear rate makes winter trenching expensive
Also consider
- Rock wheel trencher if your ground is consistently rocky or hardpan
- Standard auger if you're drilling individual holes rather than continuous trench lines
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Berlon in Canada
Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.
Care & Maintenance
- Inspect chain teeth after every use — worn teeth slow penetration dramatically and increase drive motor load; a full day's work can dull a chain in abrasive soil
- Lubricate the drive chain and boom sprockets before each use and again after every 4 hours of continuous trenching
- Check the boom bar for cracking or deformation after work in rocky or abrasive conditions — boom cracks propagate quickly under the bending loads of trenching
- Clean soil from the drive motor cooling fins and chain case after summer use — compacted soil on the motor causes overheating on long cuts
- Store the chain with teeth protected from ground contact — resting a chain on carbide tips on concrete chips the teeth before you've even used it
How to Connect
- Attach trencher boom using Bob-Tach
- Connect high-flow hydraulic couplers
- Test chain tension and direction before cutting
- Call 811 and verify all utilities located before first cut
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Berlon
Berlon 4-in-1 Skid Steer Bucket
Standard FlowBerlon Industries manufactures a Canadian-made 4-in-1 hydraulic combination bucket....
View product →
Berlon Industries 72-Inch Angle Broom for Skid Steers
Standard FlowBerlon Industries' 72-inch angle broom is a Canadian-made hydraulic sweeping attachment...
View product → Berlon Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → Berlon Industries Skid Steer Auger Drive Unit
Standard FlowBerlon Industries' hydraulic auger drive for skid steers is a Canadian-made drive unit...
View product →✓ Last checked: March 2026