HLA Vibratory Roller for Skid Steers
Overview
HLA Attachments makes a hydraulic vibratory roller attachment for skid steers used on soil compaction, asphalt rolling, and gravel base preparation. The smooth drum rolls and vibrates to achieve compaction density required for road bases, utility trench backfill, and paved surface sub-bases. Ontario-manufactured by Horst Welding. Available through HLA's Canadian dealer network.
Canada Availability
Best for: soil compaction, asphalt rolling, gravel base
Compare with: Berlon 60-Inch Soil Conditioner for Compact Skid Steers · Berlon Industries 72-Inch Soil Conditioner for Skid Steers · Berlon 84-Inch Soil Conditioner for Skid Steers
Key Facts
- Type: hydraulic vibratory drum roller
- Manufacturer: Ontario-made by Horst Welding
- Application: soil compaction, asphalt rolling, gravel base
- Drive: hydraulic vibrator motor
- Mount: universal skid steer quick attach (SSQA)
- Weight: 700–2200 lbs
- Hydraulic flow: 15–35 GPM
Is This Right For You?
Buy if
- You compact granular fill, gravel, or aggregate after grading — rollers and compactors eliminate voids
- Pathway construction, driveway base compaction, or trench backfill compaction with your skid steer
- You want to combine compaction with your existing skid steer fleet without a dedicated walk-behind compactor
Skip if
- Cohesive clay soils are your primary material — vibratory compaction is less effective in clay
- Deep fill lifts over 12 inches — you'll need multiple passes or a heavier piece of equipment
Also consider
- Soil conditioner for surface prep and grading before compaction
- Landplane for final grading before compaction
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect carbide rotor teeth after every use — chipped or worn teeth cut unevenly and increase hydraulic motor load significantly
- Replace teeth in matched pairs across the rotor to maintain balance — uneven tooth wear creates vibration that stresses motor bearings and the drive system
- Grease rotor shaft bearing housings after every 8 hours of operation
- Clean packed soil from behind the rotor guard and between tooth mounts after every use — buildup restricts rotation and can cause the rotor to stall in normal material
- Check the hydraulic motor drive coupler and belts (if belt-driven) for wear weekly during active season — belt failure in the middle of a job is a common and avoidable breakdown
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic couplers for rotor motor
- Lower rotor to working depth before engaging rotation
- Make first pass at half speed to verify depth and rock clearance
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from HLA
HLA 3230 Snow Wing Blade 8 to 13-Foot Skid Steer
Standard FlowHLA's 3230 Snow Wing is a hydraulic wing snow blade that expands from 8 to 13 feet wide...
View product → HLA 3230 Snow Wing Blade 9 to 14-Foot Skid Steer
Standard FlowThe HLA 3230 Snow Wing in the 9-to-14-foot size class is suitable for larger skid steers...
View product →
HLA 72-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 4-in-1 grapple bucket combines a general-purpose bucket with a hydraulic clamshell...
View product → HLA 84-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 84-inch 4-in-1 grapple bucket is the larger size in their grapple bucket line,...
View product →✓ Last checked: March 2026