Bobcat 60-Inch Rotary Cutter for Skid Steers
Overview
The Bobcat 60-inch rotary cutter is a compact hydraulic brush cutter for smaller Bobcat skid steers on vegetation management, right-of-way maintenance, and pasture clearing in tighter terrain. The 60-inch cutting width suits compact machines working around fences, trees, and obstacles. Bobcat factory rotary cutters are engineered for Deere machine hydraulics. Available through Bobcat dealers across Canada.
Canada Availability
Best for: vegetation management, right-of-way, tight terrain
Compare with: Baumalight RC260 Skid Steer Rotary Cutter · Baumalight RC272 Skid Steer Rotary Cutter · Berlon 60 Inch Rotary Cutter
Key Facts
- Working width: 60 inches
- Type: rotary cutter / brush hog
- Application: vegetation management, right-of-way, tight terrain
- Drive: hydraulic motor
- Mount: Bobcat Bob-Tach (universal SSQA compatible)
- Weight: 500–1675 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
Buy if
- You're clearing overgrown fields, brush lines, or rights-of-way with vegetation up to 3 inches diameter
- You want a single attachment that handles both heavy brush and coarse grass cutting
- Your acreage management work doesn't justify a dedicated forestry mulcher
Skip if
- You need to cut trees or woody material over 4 inches — a brush mulcher handles that range better
- Fine-cut finish quality matters — flail mowers produce a much finer cut with less scatter
Also consider
- Flail mower for finer mulching and safer operation near structures
- Forestry mulcher/brush mulcher for material over 4 inches diameter
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Inspect blade tips or flail hammers for wear after each use — dull cutting edges increase engine load and reduce cut quality significantly
- Check all blade bolts for proper torque before every use — loose blades on a high-RPM rotary cutter are a serious safety hazard
- Grease deck spindle bearings after every 8 hours of operation — spindle bearing failure is the most common and expensive rotary cutter repair
- Check the belt drive or hydraulic motor for overheating signs (excessive heat, smell) after extended cutting sessions in dense material
- Remove wrapped material (wire, twine, root) from around the rotor shaft after every use — wrapped material cuts through shaft seals and causes bearing contamination
How to Connect
- Attach rotary cutter frame using Bob-Tach
- Connect hydraulic couplers for motor
- Test blade rotation direction before cutting
- Keep 50m+ clear of bystanders — blade tip speed is extremely high
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Bobcat
Bobcat 1.35K Heavy Duty Pallet Fork for Small Skid Steers
The Bobcat 1.35K Heavy Duty Pallet Fork is Bobcat's lightest-duty pallet fork, rated at...
View product → Bobcat 2.5K Standard Duty Pallet Fork with 42-Inch Tines
The Bobcat 2.5K Standard Duty Pallet Fork is a 2,500 lb rated fork assembly with 42-inch...
View product →
Bobcat 66 Inch 4-in-1 Combination Bucket
Standard FlowThe 66-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product → Bobcat 80 Inch 4-in-1 Combination Bucket
Standard FlowThe 80-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product →✓ Last checked: March 2026