Werk-Brau 60-Inch Pallet Forks for Skid Steers
Overview
The Werk-Brau 60-Inch Pallet Forks for Skid Steers handles palletized loads, lumber bundles, and baled materials on Canadian farms, construction sites, and acreages. Werk-Brau (Ohio) builds OEM-quality attachments available through Canadian dealers, with a strong track record on Canadian construction sites. The 60-inch-inch frame fits standard pallet widths, and the tines adjust to handle varied load sizes. SSQA mounting means the forks swap on in minutes without tools. Available in Canada through authorized Werk-Brau dealers.
Canada Availability
Best for: long lumber, pipe, oversized industrial pallets
Compare with: Berlon Industries 48-Inch Pallet Forks for Skid Steers · Berlon 60-Inch Pallet Forks for Skid Steers · Blue Diamond 48-Inch Pallet Forks for Skid Steers
Key Facts
- Tine length: 60 inches (5 feet)
- Type: extended pallet forks
- Construction: industrial heavy-duty steel
- Application: long lumber, pipe, oversized industrial pallets
- Mount: universal skid steer quick attach (SSQA)
- Typical frame weight: 600–750 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
Buy if
- You lift pallets, bags, small bundles, or materials up to 4,000 lbs regularly
- Your machine is mid-frame (S450–S570 class) and typical loads are within standard-duty capacity
Skip if
- You regularly lift heavy or awkward loads over 5,000 lbs — standard-duty tines can bend under shock loads
- Bin moves, heavy concrete, or steel pipe are common — heavy-duty tines are worth the cost
Also consider
- Heavy-duty pallet forks if your load weights push the limit of the frame rating
- Fork frame carriage upgrade if you want a higher ITA carriage class for more lift capacity
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Werk-Brau in Canada
Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Werk-Brau
Werk-Brau 4-in-1 Skid Steer Combination Bucket
Standard FlowThe wide-inch bucket is purpose-built for skid steers and compact track loaders working in...
View product → Werk-Brau 72-Inch 4-in-1 Multipurpose Bucket for Skid Steers
Standard FlowThe Werk-Brau 4-in-1 multipurpose bucket functions as a general purpose bucket, dozer...
View product →
Werk-Brau 60-Inch Angle Broom for Skid Steers
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → Werk-Brau 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →✓ Last checked: March 2026