HLA HD5572 5500 lb Heavy Duty Pallet Forks with 72-Inch Tines
Overview
The HLA HD5572 is the longest tine option in HLA's 5,500 lb heavy duty pallet fork lineup, with 72-inch tines. Designed by HLA Attachments in Ontario, 72-inch tines are used by operators handling wide pallets, grain bags, large hay bales, and bin-style containers where the load extends beyond standard tine reach. Load centre physics mean capacity drops as load position moves out — but for operators who regularly work with oversized loads, this fork handles the job without workarounds.
Canada Availability
Compare with: Berlon 60-Inch Pallet Forks for Skid Steers · Blue Diamond 60-Inch Pallet Forks for Skid Steers · Blue Diamond 72-Inch Pallet Forks for Skid Steers
Key Facts
- Capacity: 5,500 lbs at 24" load centre
- Tine length: 72 inches
- Tine size: 1-1/2" x 4" Class II hook type solid tines
- Carriage width: 50 inches
- Sliding adjustable tines, lockable in any position
- Weight: approximately 570 lbs
- Includes guard; optional full back guard (brick guard)
- SSQA skid steer quick attach mount
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
Buy if
- You lift pallets, bags, small bundles, or materials up to 4,000 lbs regularly
- Your machine is mid-frame (S450–S570 class) and typical loads are within standard-duty capacity
Skip if
- You regularly lift heavy or awkward loads over 5,000 lbs — standard-duty tines can bend under shock loads
- Bin moves, heavy concrete, or steel pipe are common — heavy-duty tines are worth the cost
Also consider
- Heavy-duty pallet forks if your load weights push the limit of the frame rating
- Fork frame carriage upgrade if you want a higher ITA carriage class for more lift capacity
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from HLA
HLA 3230 Snow Wing Blade 8 to 13-Foot Skid Steer
Standard FlowHLA's 3230 Snow Wing is a hydraulic wing snow blade that expands from 8 to 13 feet wide...
View product → HLA 3230 Snow Wing Blade 9 to 14-Foot Skid Steer
Standard FlowThe HLA 3230 Snow Wing in the 9-to-14-foot size class is suitable for larger skid steers...
View product →
HLA 72-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 4-in-1 grapple bucket combines a general-purpose bucket with a hydraulic clamshell...
View product → HLA 84-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 84-inch 4-in-1 grapple bucket is the larger size in their grapple bucket line,...
View product →✓ Last checked: March 2026