Case Skid Steer Landplane
Overview
The wide-inch land plane grades gravel roads, laneways, and acreage driveways to a smooth, crowned finish. Case CE attachments are available through Canadian equipment dealers and distributors. Front and rear scarifier shanks break up compacted material before the blade redistributes it evenly. Designed for skid steers and CTLs with universal SSQA mounting. Available through Case Construction Equipment dealers across Canada.
Canada Availability
Best for: gravel road grading, levelling, parking lot prep
Compare with: Berlon 72-Inch Land Plane for Skid Steers · Berlon 72 Inch Skid Steer Landplane · Berlon 96 Inch Skid Steer Landplane
Key Facts
- Brand: Case Construction Equipment
- Type: landplane
- Drive: passive drum
- Mount: Case quick attach (SSQA compatible)
- Application: gravel road grading, levelling, parking lot prep
- Weight: 500–1500 lbs
- Hydraulic flow: N/A - passive attachment
Is This Right For You?
Buy if
- You maintain gravel driveways, rural roads, acreage laneways, or field access roads with a skid steer
- Float mode is available on your machine — landplanes need to float to follow the contour of the ground
Skip if
- Your surface is hardpan or frozen — a land plane rides on top of hard surfaces and doesn't cut into them
- You need to move large volumes of material — a land plane redistributes existing material, it doesn't load and dump
Also consider
- Box blade for primary grading before final land plane pass
- Dozer blade if you need to push material rather than float and level
Designed for Case machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Case CE in Canada
Case Construction Equipment attachments are available through a national Canadian dealer network. Built to OEM standards and compatible with Case skid steers via universal quick attach.
Care & Maintenance
- Inspect the floating blade for wear — sharp edges level properly; a worn-smooth edge scrapes without cutting and leaves a rough surface
- Lubricate blade hinge and float mechanism pivot pins each season — seized float pivots defeat the purpose of the attachment
- Check scarifier shanks for tooth wear or breakage before each use — a missing shank puts lateral load on adjacent shanks and the boom
- After use in mud or clay, clean accumulated material from the blade housing — dried clay adds uneven weight and prevents proper floating
- Inspect blade-mounting welds for cracking at season start — the float mechanism amplifies vertical stress on the mounting hardware over time
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (some are passive/manual)
- Set cutting angle before working (typically 0-5° for finish grade)
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Case CE
Case Skid Steer 4-in-1 Combination Bucket
Standard FlowCase Construction Equipment offers a 4-in-1 combination bucket for Case skid steers and...
View product →
Case Skid Steer Angle Broom
Standard FlowCase Construction Equipment offers a hydraulic angle broom for Case skid steers. The...
View product →
Case Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Case Skid Steer Cement Mixer Attachment
Standard FlowCase's skid steer cement mixer is engineered for Case SV and SR series machines, featuring...
View product →✓ Last checked: March 2026