HLA HB500 Compact Hydraulic Breaker

Name: HLA HB500 Compact Hydraulic Breaker
Brand: HLA Attachments
SKU: hla-hb500-hydraulic-breaker
Availability: InStock

Mid

Standard Flow

Runs on standard auxiliary flowFits most skid steers, including small-frame

View on hlaattachments.com →

Overview

The HLA HB500 Compact Hydraulic Breaker demolishes concrete slabs, asphalt, rock faces, and frozen ground that buckets cannot penetrate. HLA Attachments attachments are available through Canadian equipment dealers and distributors. Impact energy and blow rate determine performance on hard material; match the breaker class to your machine's auxiliary hydraulic output. Used extensively on Canadian construction and utility sites. Canadian-manufactured by HLA Attachments (Ontario). Available through GLC Equipment and HLA dealers.

Canada Availability

Canadian-manufactured by HLA Attachments (Ontario). Available through GLC Equipment and HLA dealers.

Compare with: Atlas Copco SB 102 Hydraulic Breaker (Legacy) · Berlon Industries Skid Steer Hydraulic Breaker · Blue Diamond Skid Steer Hydraulic Breaker

Key Facts

Model: HLA HB500
Brand: HLA Attachments
Type: compact hydraulic breaker
Drive: standard hydraulic
Mount: universal SSQA quick attach
Manufacturer: Ontario, Canada
Weight: 500–900 lbs
Hydraulic flow: 8–20 GPM

✓ Specs sourced from hlaattachments.com · Last verified: March 2026

View on hlaattachments.com →View on glcequipment.ca →

Is This Right For You?

Buy if

You break concrete curbs, asphalt patches, frost, or light stone on compact to medium skid steers
Occasional demolition is part of your work mix and you want a simple, reliable hammer without high cost
Your machine has standard hydraulic flow — light-duty breakers don't require high-flow circuits

Skip if

Reinforced concrete foundations or large rock are your main targets — a medium or heavy hammer is needed
You run a large-frame machine — a light-duty breaker is undersized and won't give adequate productivity

Also consider

Medium-duty hydraulic breaker for larger machines and harder material
Heavy-duty breaker for large-frame machines and heavy demolition

Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.

About HLA Attachments in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

Check nitrogen buffer gas pressure at the start of every season and whenever impact energy feels reduced — low gas pressure is the most common cause of reduced performance
Lubricate the tool (chisel) bushing and retainer pins before every use — dry bushings accelerate side-loading wear on both the bushing and the tool shank
Inspect the lower bushing for wear after every 40 hours — a worn bushing allows chisel wobble, reducing impact energy delivery and accelerating shank wear
Never blank-fire the breaker — operating without material contact destroys the internal valve in minutes; this is the most common cause of breaker failures
Verify return-line back-pressure annually — back-pressure exceeding the breaker's rated limit destroys the valve seal progressively and may not be immediately obvious