Epiroc SB 702 Hydraulic Hammer

Name: Epiroc SB 702 Hydraulic Hammer
Brand: Epiroc
SKU: epiroc-sb702-hydraulic-breaker
Availability: InStock

Mid

Standard Flow

Runs on standard auxiliary flowBorderline for small-frame machines: verify ROCFits most mid-frame skid steers and CTLs

View on epiroc.com →

Epiroc SB 702 hydraulic breaker skid steer attachment

Overview

The Epiroc SB 702 Hydraulic Hammer demolishes concrete slabs, asphalt, rock faces, and frozen ground that buckets cannot penetrate. Epiroc attachments are available through Canadian equipment dealers and distributors. Impact energy and blow rate determine performance on hard material; match the breaker class to your machine's auxiliary hydraulic output. Used extensively on Canadian construction and utility sites. Available through Epiroc Canada dealers and service network.

Canada Availability

Available through Epiroc Canada dealers and service network.

Best for: demolition, quarrying, pavement work

Compare with: Atlas Copco SB 102 Hydraulic Breaker (Legacy) · Berlon Industries Skid Steer Hydraulic Breaker · Blue Diamond Skid Steer Hydraulic Breaker

Key Facts

Model: Epiroc SB 702
Brand: Epiroc Canada
Type: hydraulic hammer, AutoControl technology
Class: medium-frame skid steer / CTL
Application: demolition, quarrying, pavement work
Weight: 700–1400 lbs
Hydraulic flow: 8–20 GPM

✓ Specs sourced from epiroc.com · Last verified: March 2026

View on epiroc.com →

Is This Right For You?

Buy if

You break concrete slabs, curbs, light foundations, and moderate rock on medium-frame skid steers
General contractors who need a breaker for occasional demo work without investing in a dedicated excavator attachment
Your machine has 40-70 HP and standard hydraulic flow — medium breakers are sized for that range

Skip if

Heavy reinforced concrete or large rock is your primary target — a heavy-duty breaker gets the job done faster
You're only doing light demolition on small machines — a compact breaker is sufficient and lighter

Also consider

Heavy-duty hydraulic breaker for larger machines and harder material
Light-duty breaker if your machine is compact and work is occasional

Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.

About Epiroc in Canada

Epiroc (formerly Atlas Copco's mining and construction division) is a global manufacturer with a Canadian presence through Epiroc Canada. Their hydraulic breakers are used across mining, construction, and demolition applications. Canadian service and parts are available through Epiroc Canada's national network.

Care & Maintenance

Check nitrogen buffer gas pressure at the start of every season and whenever impact energy feels reduced — low gas pressure is the most common cause of reduced performance
Lubricate the tool (chisel) bushing and retainer pins before every use — dry bushings accelerate side-loading wear on both the bushing and the tool shank
Inspect the lower bushing for wear after every 40 hours — a worn bushing allows chisel wobble, reducing impact energy delivery and accelerating shank wear
Never blank-fire the breaker — operating without material contact destroys the internal valve in minutes; this is the most common cause of breaker failures
Verify return-line back-pressure annually — back-pressure exceeding the breaker's rated limit destroys the valve seal progressively and may not be immediately obvious