Case Skid Steer Grapple Bucket
Overview
Case Construction Equipment offers a hydraulic grapple bucket for Case skid steers and CTLs. Used for handling demolition material, brush, and rock on Canadian construction sites. Case's hydraulic top claw secures irregular loads for safer handling. Available through Case dealers across Canada.
Canada Availability
Best for: demolition, brush, rock, irregular material
Compare with: Berlon 66 Inch Grapple Bucket · Berlon Industries 72-Inch Grapple Bucket for Skid Steers · Berlon 78 Inch Grapple Bucket
Key Facts
- Brand: Case Construction Equipment
- Type: hydraulic grapple bucket
- Drive: hydraulic top claw
- Mount: Case quick attach (SSQA compatible)
- Application: demolition, brush, rock, irregular material
- Typical weight: 550 lbs
- Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Is This Right For You?
Buy if
- You need more versatility than a bucket — grab, hold, and move irregular loads
- You clear brush, debris, or demolition material where a bucket loses control of the load
Skip if
- Dense, uniform material (gravel, sand, soil) is better handled by a GP bucket with more capacity per cycle
- The grapple weight would push you near your machine's ROC limit with this load type
Also consider
- GP bucket for high-volume dense material work
- Root grapple for brush-heavy clearing jobs
Designed for Case machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Case CE in Canada
Case Construction Equipment attachments are available through a national Canadian dealer network. Built to OEM standards and compatible with Case skid steers via universal quick attach.
Care & Maintenance
- Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
- Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
- Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
- Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
- Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris
How to Connect
- Mount using same Bob-Tach process as buckets
- Connect hydraulic couplers (depressurized — release aux hydraulics first)
- Verify open/close direction at idle before working
- Test grapple open/close 3× before lifting any load
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Case CE
Case Skid Steer 4-in-1 Combination Bucket
Standard FlowCase Construction Equipment offers a 4-in-1 combination bucket for Case skid steers and...
View product →
Case Skid Steer Angle Broom
Standard FlowCase Construction Equipment offers a hydraulic angle broom for Case skid steers. The...
View product →
Case Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Case Skid Steer Cement Mixer Attachment
Standard FlowCase's skid steer cement mixer is engineered for Case SV and SR series machines, featuring...
View product →✓ Last checked: March 2026