Blue Diamond 72-Inch Dozer Blade for Skid Steers

Premium
Standard Flow
Runs on standard auxiliary flowFits most skid steers, including small-frame
View on bluediamondattachments.com →
Blue Diamond 72-Inch Dozer Blade for Skid Steers

Overview

The Blue Diamond 72-inch Dozer Blade delivers hydraulic-angle control for grading, backfill, and clearing on mid-size skid steers and compact track loaders. Heavy rolled-steel moldboard, replaceable cutting edge, and dual hydraulic cylinder angle system with trip lockout for dirt work. Recommended for machines over 50 HP. Colorado-made. Available in Canada through Blue Diamond's dealer network.

Canada Availability

Available in Canada through Blue Diamond's Canadian dealer network.

Key Facts

  • Working width: 72 inches
  • Angle: hydraulic
  • Application: backfill, grading, site clearing
  • Mount: universal SSQA
  • Weight: 400–1200 lbs
  • Hydraulic flow: 10–20 GPM
Specs sourced from bluediamondattachments.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You push material forward in a straight line: stockpile cleanup, rough site clearing, or road building
  • You need basic grading on unpaved surfaces and already own or operate a skid steer

Skip if

  • Angle control or cast direction matters — a 4-way or 6-way blade is worth the upgrade for that work
  • Finish grading is your goal — a box blade or land plane gives you far more control of the final surface

Also consider

  • 4-way or 6-way dozer blade if you need angle control
  • Box blade or land plane if finish grading is the primary task
Machine Compatibility

Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.

About Blue Diamond in Canada

Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.

Care & Maintenance

  • Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
  • Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
  • Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
  • Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
  • Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage

How to Connect

  1. Attach blade frame to Bob-Tach
  2. If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
  3. Test all blade movements (up/down, tilt left/right, angle) before working
Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026