HLA Skid Steer Concrete Funnel Bucket

Mid

Standard Flow

Runs on standard auxiliary flowBorderline for small-frame machines: verify ROCFits most mid-frame skid steers and CTLs

Overview

HLA's concrete funnel bucket holds up to 13 cubic feet of concrete and discharges through a 12x12-inch opening, eliminating the need for wheelbarrows in tight working spaces. At 19 inches deep and 36 inches long, it handles concrete delivery for sidewalks, driveways, and footings. Ontario-manufactured by Horst Welding and available through Langner Equipment in Canada in sizes from 48 to 78 inches.

Canada Availability

Canadian-manufactured by Horst Welding (Listowel, ON). Available through HLA dealers and Langner Equipment in Canada. Pricing on application.

Best for: concrete delivery, sidewalks, footings

Compare with: Berlon Industries Skid Steer Cement Mixer · Berlon Heavy Duty Skid Steer Cement Mixer · Blue Diamond Skid Steer Cement Mixer

Key Facts

Working width: 48–78 inch range
Capacity: up to 13 cubic feet of concrete
Dimensions: 19" deep x 36" long
Discharge opening: 12" x 12"
Application: concrete delivery, sidewalks, footings
Ontario-manufactured by Horst Welding
SSQA skid steer quick attach
Weight: 650–1550 lbs
Hydraulic flow: 10–20 GPM

✓ Specs sourced from hlaattachments.com · Last verified: March 2026

View on hlaattachments.com →View on langnerequipment.ca →

Is This Right For You?

Buy if

You need to pour concrete into columns, walls, or forms from height — hoppers give precise pour control
Your crew mixes on site and pours repeatedly without a concrete truck — hoppers work with a separate mixer
Tight access sites where a concrete truck can't reach and pour accuracy matters

Skip if

You need to mix the concrete yourself — a rotating drum cement mixer does the mixing and pouring
Flat slab work with no forms — a bucket or chute is simpler for that application

Also consider

Standard cement mixer if you also need to mix concrete (not just pour)
Large-capacity cement mixer for high-volume pours

Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.

About HLA in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time

How to Connect

Attach mixer frame using Bob-Tach
Connect hydraulic drum rotation circuit
Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
Verify drum is empty before connecting to machine

Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.