Cat Work Tools Large Skid Steer Cement Mixer

Mid

Standard Flow

Runs on standard auxiliary flowFits most skid steers, including small-frame

Overview

The Cat Work Tools Large Skid Steer Cement Mixer mixes concrete, mortar, and grout directly on Canadian job sites using the skid steer's hydraulic system to rotate the drum. Cat attachments are available through Canadian equipment dealers and distributors. On-site mixing reduces waste and delivery costs compared to ready-mix trucks for small pours — footings, posts, small slabs. Mounts via universal SSQA. Available through Cat Work Tools dealers across Canada.

Canada Availability

Available through Cat Work Tools dealers across Canada.

Best for: production concrete mixing, multiple footings, foundations

Compare with: Berlon Industries Skid Steer Cement Mixer · Berlon Heavy Duty Skid Steer Cement Mixer · Blue Diamond Skid Steer Cement Mixer

Key Facts

Brand: Cat Work Tools
Type: large hydraulic cement mixer
Drive: hydraulic gear motor
Mount: Cat quick attach (BOCE)
Application: production concrete mixing, multiple footings, foundations
Weight: 500–1200 lbs
Hydraulic flow: 10–20 GPM

✓ Specs sourced from cat.com · Last verified: March 2026

View on cat.com →

Is This Right For You?

Buy if

You pour continuous large batches — footings, columns, or multiple structures in sequence
Your crew does daily concrete work and needs a mixer that can keep up with demand all day
Large-frame skid steer with adequate hydraulic flow to power the drum continuously

Skip if

You pour occasional small batches — a standard mixer handles that without the extra weight and cost
Your machine is compact or mid-frame — a heavy mixer may exceed lift capacity with a full drum

Also consider

Standard cement mixer for occasional or small-batch concrete work
Concrete hopper for pour-only work where mixing is done elsewhere

Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.

About Cat in Canada

Caterpillar attachments are backed by the largest dealer network in Canada, with service centres in every major city. OEM quality with the assurance of nationwide parts and support.

Care & Maintenance

Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time

How to Connect

Attach mixer frame using Bob-Tach
Connect hydraulic drum rotation circuit
Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
Verify drum is empty before connecting to machine

Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.