Werk-Brau 84-Inch Snow Bucket for Skid Steers
Overview
The Werk-Brau 84-inch snow bucket is a high-capacity containment bucket designed for commercial snow removal with skid steers. The curved high-volume design maximizes payload per bucket, reducing the number of cycles needed to clear a large property. A rubber cutting edge option protects asphalt surfaces. Used by property managers and municipalities across Canada. Available through Werk-Brau's Canadian dealer network.
Canada Availability
Best for: commercial lot snow removal, municipal operations
Compare with: Berlon 84-Inch GP Bucket for Skid Steers · Berlon 96-Inch General Purpose Bucket for Large Skid Steers · Berlon 72-Inch Heavy-Duty Smooth-Edge Skid Steer Bucket
Key Facts
- Working width: 84 inches
- Type: snow / high-capacity bucket
- Cutting edge: rubber or steel option
- Application: commercial lot snow removal, municipal operations
- Mount: universal skid steer quick attach (SSQA)
- Typical weight: 520–680 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
- You want more cubic yards per pass without exceeding your machine's weight limit
Skip if
- Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
- You need a bucket that doubles for digging or grading
Also consider
- GP bucket if you split time between light and heavy material
- Snow pusher if snow moving is your primary winter task
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Werk-Brau in Canada
Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
TMG-SLG72 72-Inch Log Grapple for Skid Steers
Standard FlowThe TMG-SLG72 is a 72-inch log grapple for skid steers from Canadian manufacturer TMG...
View product →
New Holland Skid Steer Pallet Forks
The New Holland Skid Steer Pallet Forks handles palletized loads, lumber bundles, and...
View product →More from Werk-Brau
Werk-Brau 60-Inch Angle Broom for Skid Steers
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → Werk-Brau 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → Werk-Brau 96-Inch Angle Broom for Large Skid Steers
Standard FlowThe 96-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Werk-Brau Skid Steer Auger Drive Unit
Standard FlowWerk-Brau manufactures hydraulic auger drive units for skid steers, compatible with...
View product →✓ Last checked: March 2026