Werk-Brau Skid Steer Auger Drive Unit
Overview
Werk-Brau manufactures hydraulic auger drive units for skid steers, compatible with standard hex-drive auger bits for fence post holes, foundation work, and utility installations. Werk-Brau's heavy-duty construction standards apply to their auger drives as well as their buckets and blades. Available through authorized Werk-Brau dealers in Canada.
Canada Availability
Best for: fence posts, foundation work, utility holes
Compare with: Baumalight 10 Inch Skid Steer Auger Bit · Baumalight 12 Inch Skid Steer Auger Bit · Baumalight 18 Inch Skid Steer Auger Bit
Key Facts
- Type: hydraulic auger drive unit
- Accepts: standard hex-drive auger bits
- Application: fence posts, foundation work, utility holes
- Drive: hydraulic motor
- Mount: universal skid steer quick attach (SSQA)
- Typical bit weight: 35–60 lbs
- Hydraulic flow: determined by auger drive unit (typically 15–30 GPM standard flow, 30–45 GPM high-flow for large drives)
Is This Right For You?
Buy if
- You drill post holes, footings, or tree holes regularly enough that buying beats renting
- Your skid steer's hydraulic output is matched to the drive unit — verify GPM range before buying
Skip if
- You only drill occasionally — renting an auger package for $250–$400/day often wins over ownership at $3,000–$8,000 investment
- Your machine's GPM is outside the drive unit's rated range — running outside spec damages the motor
Also consider
- A rental package first to confirm the right drive unit spec for your soil and machine
- Auger bits in multiple diameters — the drive unit investment only makes sense if you have the right bits to go with it
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Werk-Brau in Canada
Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
How to Connect
- Attach auger drive head using Bob-Tach
- Connect high-flow hydraulic couplers (colour-coded on most brands)
- Verify rotation direction — auger should rotate clockwise when viewed from above
- Lower auger to ground and test rotation at idle before digging
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Werk-Brau
Werk-Brau 4-in-1 Skid Steer Combination Bucket
Standard FlowThe wide-inch bucket is purpose-built for skid steers and compact track loaders working in...
View product → Werk-Brau 72-Inch 4-in-1 Multipurpose Bucket for Skid Steers
Standard FlowThe Werk-Brau 4-in-1 multipurpose bucket functions as a general purpose bucket, dozer...
View product →
Werk-Brau 60-Inch Angle Broom for Skid Steers
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → Werk-Brau 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →✓ Last checked: March 2026