Virnig V60 HSRV84 Skeleton Rock Bucket
Overview
The Virnig V60 HSRV84 skeleton rock bucket spans 84 inches for high-volume rock separation on construction and site-clearing work. Heavy-duty 0.5-inch Grade 80 tine plate keeps this bucket productive even in the most abrasive rocky conditions. At 765 lbs, this is serious equipment for serious machines — required loader capacity is 1,800 lbs and up. Ships to Canada through Virnig's authorized dealer network.
Canada Availability
Compare with: Virnig V60 HMPV72 Heavy-Duty 4-in-1 Multi-Purpose Bucket · Virnig V60 HMPV84 Heavy-Duty 4-in-1 Multi-Purpose Bucket · Virnig V60 HCDB72 High Capacity Dirt Bucket
Key Facts
- Model: HSRV84
- Overall width: 85.5 inches
- Inside width: 83.4 inches
- Overall height: 21.5 inches
- Number of tines (with sides): 20
- Tine spacing: 3.9 inches
- Tine thickness: 0.5" Grade 80 plate
- Weight: 765 lbs
- Recommended loader capacity: greater than 1,800 lbs
- Universal SSQA skid steer mount
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You break and move rock, frozen ground, or heavy demolition debris regularly
- You need a bolt-on cutting edge that's replaceable when worn
Skip if
- Your work is mostly topsoil, gravel, and light debris — a GP bucket is lighter and faster
- You need a wider bucket — rock buckets max out around 84 inches for most machines
Also consider
- GP bucket for general-purpose daily work
- Skeleton (rock sieve) bucket if you need to separate fines from rock
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
TMG-SLG60 60-Inch Log Grapple for Skid Steers
Standard FlowThe TMG-SLG60 is a 60-inch log grapple for skid steers from Canadian manufacturer TMG...
View product →
New Holland Heavy Duty Skid Steer Pallet Forks
The New Holland Heavy Duty Skid Steer Pallet Forks handles palletized loads, lumber...
View product →More from Virnig
Virnig 72-Inch Skid Steer Angle Broom
Standard FlowVirnig's 72-inch angle broom for full-size skid steers handles lot sweeping, spring road...
View product → Virnig 84-Inch Skid Steer Angle Broom
Standard FlowVirnig's 84-inch angle broom is a wide-format sweeper for large-frame skid steers used in...
View product → Virnig Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Virnig Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026