HLA Stone Fork Regular Duty 62-Inch Skid Steer
Overview
HLA's 62-inch regular duty stone fork provides good coverage width for site prep, rock removal, and debris screening work on mid-size skid steers. The retainer-style tines at 2.5-inch spacing let fine material pass while retaining rock and debris. 400 Brinell high-tensile steel tine points resist wear in abrasive rocky conditions. Rated at 5,500 lbs capacity. Made in Canada and available through TAG Equipment and other Canadian HLA dealers.
Canada Availability
Compare with: Berlon 60-Inch General Purpose Bucket for Skid Steers · Berlon 72-Inch Heavy-Duty Smooth-Edge Skid Steer Bucket · Berlon 72-Inch Skid Steer Rock Bucket
Key Facts
- Width: 62 inches
- Rated capacity: 5,500 lbs
- Tine spacing: 2.5 inches
- Tine point: 5/8" Brinell 400 high-tensile steel
- Height: 23 inches
- Depth: 40 inches
- Duty: regular duty
- Made in Canada
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You break and move rock, frozen ground, or heavy demolition debris regularly
- You need a bolt-on cutting edge that's replaceable when worn
Skip if
- Your work is mostly topsoil, gravel, and light debris — a GP bucket is lighter and faster
- You need a wider bucket — rock buckets max out around 84 inches for most machines
Also consider
- GP bucket for general-purpose daily work
- Skeleton (rock sieve) bucket if you need to separate fines from rock
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
TMG-SG96 96-Inch Root Grapple for Skid Steers
Standard FlowThe TMG-SG96 is a 96-inch skeleton grapple for large-frame skid steers — one of the widest...
View product →
John Deere Worksite Pro Standard Duty Pin-Style Pallet Forks
The entry point in John Deere's Worksite Pro pallet fork lineup. Pin-style means the tines...
View product →More from HLA
HLA 3230 Snow Wing Blade 8 to 13-Foot Skid Steer
Standard FlowHLA's 3230 Snow Wing is a hydraulic wing snow blade that expands from 8 to 13 feet wide...
View product → HLA 3230 Snow Wing Blade 9 to 14-Foot Skid Steer
Standard FlowThe HLA 3230 Snow Wing in the 9-to-14-foot size class is suitable for larger skid steers...
View product →
HLA 72-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 4-in-1 grapple bucket combines a general-purpose bucket with a hydraulic clamshell...
View product → HLA 84-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 84-inch 4-in-1 grapple bucket is the larger size in their grapple bucket line,...
View product →✓ Last checked: March 2026