John Deere Worksite Pro Standard Duty Pin-Style Pallet Forks
Overview
The entry point in John Deere's Worksite Pro pallet fork lineup. Pin-style means the tines attach through pins and float with the ground contour — unlimited tine positioning, single-piece backrest, and clear sightlines to the fork tips. Fixed tine spacing keeps it simple and light. Right choice for farm use, acreage work, or anyone moving standard pallets who doesn't need adjustable width. At 381 lb it's the lightest fork in the Worksite Pro range. No hydraulics required.
Canada Availability
Best for: pallet handling, lumber and tubing, farm material transport
Compare with: Berlon Skid Steer Lumber Forks · Berlon Industries 48-Inch Pallet Forks for Skid Steers · Berlon 60-Inch Pallet Forks for Skid Steers
Key Facts
- Weight: 381 lb
- Application: pallet handling, lumber and tubing, farm material transport
- Frame dimensions: 49.3 in L x 53.3 in W x 39 in H
- Tine style: pin-mount, tines float with ground contour, non-adjustable spacing
- Tine positions: unlimited (pin-hole pattern)
- Single-piece backrest
- Duty rating: standard duty — farm, acreage, residential construction, light material handling
- No hydraulics required
- SSQA (universal skid steer quick attach) mount
- Compatible with John Deere skid steers, compact track loaders, and compact wheel loaders; compatible with most competitive models
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
Buy if
- You lift pallets, bags, small bundles, or materials up to 4,000 lbs regularly
- Your machine is mid-frame (S450–S570 class) and typical loads are within standard-duty capacity
Skip if
- You regularly lift heavy or awkward loads over 5,000 lbs — standard-duty tines can bend under shock loads
- Bin moves, heavy concrete, or steel pipe are common — heavy-duty tines are worth the cost
Also consider
- Heavy-duty pallet forks if your load weights push the limit of the frame rating
- Fork frame carriage upgrade if you want a higher ITA carriage class for more lift capacity
Designed for John Deere machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from John Deere
John Deere Worksite Pro 4-in-1 Combination Bucket
Standard FlowJohn Deere's Worksite Pro 4-in-1 bucket is a hydraulic combination attachment for John...
View product →
John Deere AB60B 60 Inch Skid Steer Angle Broom
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → John Deere AB72B 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026