Kubota 72 Inch Skid Steer Utility Bucket
Overview
The 72-inch-inch bucket is purpose-built for skid steers and compact track loaders working in soil, gravel, general material loading. Kubota Canada dealer locations span every province, with factory-matched attachments and parts support. Features a replaceable cutting edge and universal SSQA mount for broad machine compatibility. Available through Kubota dealers across Canada.
Canada Availability
Best for: soil, gravel, general material loading
Compare with: Berlon 60-Inch General Purpose Bucket for Skid Steers · Berlon 84-Inch GP Bucket for Skid Steers · Berlon 72-Inch Heavy-Duty Smooth-Edge Skid Steer Bucket
Key Facts
- Brand: Kubota Tractor Corporation
- Working width: 72 inches
- Type: utility bucket
- Mount: Kubota quick attach (SSQA compatible)
- Application: soil, gravel, general material loading
- Typical weight: 430–560 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You need one versatile bucket for gravel, soil, concrete chunks, and general debris
- Your machine is mid-frame (S450–S650 class) or CTL
Skip if
- You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
- You need clamshell/4-in-1 functionality
Also consider
- Rock bucket if your primary work is shot rock or frozen ground
- 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
Designed for Kubota machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Kubota in Canada
Kubota attachments are available through the Kubota dealer network across Canada, which covers most provinces. If you run Kubota compact equipment, same-brand attachments provide the best hydraulic compatibility and your local dealer handles both machine and attachment support under one roof.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
TMG-SBG72 Skid Steer Round Bale Gripper
Standard FlowThe TMG-SBG72 is a hydraulic round bale gripper for skid steers, built to squeeze and...
View product →
IronBull Skid Steer Pallet Forks
The IronBull Skid Steer Pallet Forks handles palletized loads, lumber bundles, and baled...
View product →More from Kubota
Kubota Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Kubota Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Kubota Skid Steer Cement Mixer Attachment
Standard FlowKubota's skid steer cement mixer is designed for SSV and SVL series machines, using the...
View product →
Kubota Skid Steer Dozer Blade
Standard FlowThe wide-inch dozer blade pushes gravel, soil, snow, and debris across yards, driveways,...
View product →✓ Last checked: March 2026