Kubota Skid Steer Dozer Blade
Overview
The wide-inch dozer blade pushes gravel, soil, snow, and debris across yards, driveways, and construction sites. Kubota Canada dealer locations span every province, with factory-matched attachments and parts support. Angle adjustment lets operators cast material left or right without repositioning the machine. The universal SSQA mount fits most skid steers and CTLs. Available through Kubota dealers across Canada.
Canada Availability
Best for: soil grading, driveway levelling, site prep
Compare with: Berlon Industries 84-Inch Dozer Blade for Skid Steers · Berlon 96 Inch Skid Steer Dozer Blade · Berlon Skid Steer Ice Scraper with Oscillating Disc
Key Facts
- Brand: Kubota Tractor Corporation
- Type: hydraulic dozer blade
- Drive: hydraulic float
- Mount: Kubota quick attach (SSQA compatible)
- Application: soil grading, driveway levelling, site prep
- Weight: 400–1200 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
Buy if
- You push material forward in a straight line: stockpile cleanup, rough site clearing, or road building
- You need basic grading on unpaved surfaces and already own or operate a skid steer
Skip if
- Angle control or cast direction matters — a 4-way or 6-way blade is worth the upgrade for that work
- Finish grading is your goal — a box blade or land plane gives you far more control of the final surface
Also consider
- 4-way or 6-way dozer blade if you need angle control
- Box blade or land plane if finish grading is the primary task
Designed for Kubota machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Kubota in Canada
Kubota attachments are available through the Kubota dealer network across Canada, which covers most provinces. If you run Kubota compact equipment, same-brand attachments provide the best hydraulic compatibility and your local dealer handles both machine and attachment support under one roof.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Kubota
Kubota Skid Steer 4-in-1 Combination Bucket
Standard FlowKubota's 4-in-1 combination bucket is available for SSV and SVL series machines. Used by...
View product →
Kubota Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Kubota Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Kubota Skid Steer Cement Mixer Attachment
Standard FlowKubota's skid steer cement mixer is designed for SSV and SVL series machines, using the...
View product →✓ Last checked: March 2026