HLA 120-Inch Snow Bucket with Bolt-On Edge

Mid
No hydraulics requiredFits most skid steers, including small-frame
View on hlaattachments.com →
HLA 120-Inch Snow Bucket with Bolt-On Edge

Overview

HLA's 120-inch snow bucket is their largest skid steer snow bucket — 10 feet wide for maximum clearing passes on the largest skid steers and CTLs in commercial contracts. Priced at approximately $4,300 CAD through Langner Equipment. Ontario-manufactured by Horst Welding in Listowel, Ontario. Bolt-on cutting edge standard. The right tool for airport aprons, distribution centres, and large industrial sites.

Canada Availability

Ontario-manufactured by Horst Welding. Available through HLA dealers and Langner Equipment in Canada at approximately $4,300 CAD.

Key Facts

  • Working width: 120 inches (10 feet)
  • Bolt-on cutting edge standard
  • Application: largest skid steers, commercial/industrial snow
  • Ontario-manufactured by Horst Welding (Listowel, ON)
  • SSQA skid steer quick attach
  • Typical weight: 600–800 lbs (varies by manufacturer)
  • Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Specs sourced from hlaattachments.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
  • You want more cubic yards per pass without exceeding your machine's weight limit

Skip if

  • Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
  • You need a bucket that doubles for digging or grading

Also consider

  • GP bucket if you split time between light and heavy material
  • Snow pusher if snow moving is your primary winter task
Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About HLA in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

  • Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
  • Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
  • Check coupler latch engagement before every use — a partially latched bucket can release under load
  • Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
  • Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late

How to Connect

  1. Position bucket face-down on ground
  2. Drive forward into Bob-Tach receiver arms
  3. Pull both lock handles to engage
  4. Verify orange indicators show LOCKED
  5. Test lift 6 inches — do not drive until confirmed locked
Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026