Blue Diamond 108-Inch GP Bucket for Skid Steers

Premium
No hydraulics requiredFits most skid steers, including small-frame
View on bluediamondattachments.com →
Blue Diamond 108-Inch GP Bucket for Skid Steers

Overview

The Blue Diamond 108-inch General Purpose Bucket is a large-capacity skid steer bucket for high-volume earthmoving, gravel loading, and construction material handling on large-frame CTLs. Replaceable cutting edge, heavy-gauge steel construction. Designed to maximize cubic footage per pass on demanding sites. Colorado-made by Blue Diamond. Available through Canadian dealers with North American parts support.

Canada Availability

Available in Canada through Blue Diamond's Canadian dealer network.

Key Facts

  • Working width: 108 inches
  • Application: gravel, soil, construction material
  • Cutting edge: replaceable
  • Mount: universal SSQA
  • Typical weight: 600–800 lbs (varies by manufacturer)
  • Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Specs sourced from bluediamondattachments.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You need one versatile bucket for gravel, soil, concrete chunks, and general debris
  • Your machine is mid-frame (S450–S650 class) or CTL

Skip if

  • You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
  • You need clamshell/4-in-1 functionality

Also consider

  • Rock bucket if your primary work is shot rock or frozen ground
  • 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Blue Diamond in Canada

Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.

Care & Maintenance

  • Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
  • Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
  • Check coupler latch engagement before every use — a partially latched bucket can release under load
  • Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
  • Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late

How to Connect

  1. Position bucket face-down on ground
  2. Drive forward into Bob-Tach receiver arms
  3. Pull both lock handles to engage
  4. Verify orange indicators show LOCKED
  5. Test lift 6 inches — do not drive until confirmed locked
Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026