HLA Skid Steer Skeleton Bucket (Rock Bucket)
Overview
HLA Attachments' skeleton bucket (rock bucket) features a tine-bottom design for separating rocks and coarse material from soil on Canadian excavation and agricultural sites. Ontario-manufactured with heavy-duty tines for handling rough rock and boulder work common in Canadian prairie and Shield terrain. Available through GLC Equipment and HLA dealers.
Canada Availability
Best for: rock separation, field stone, aggregate screening
Compare with: Berlon 4-in-1 Skid Steer Bucket · Berlon 60-Inch General Purpose Bucket for Skid Steers · Berlon 84-Inch GP Bucket for Skid Steers
Key Facts
- Brand: HLA Attachments
- Type: skeleton/rock bucket (tine-bottom)
- Manufacturer: HLA Attachments, Ontario, Canada
- Drive: static (no hydraulics required)
- Mount: universal SSQA quick attach
- Application: rock separation, field stone, aggregate screening
- Typical weight: 450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You break and move rock, frozen ground, or heavy demolition debris regularly
- You need a bolt-on cutting edge that's replaceable when worn
Skip if
- Your work is mostly topsoil, gravel, and light debris — a GP bucket is lighter and faster
- You need a wider bucket — rock buckets max out around 84 inches for most machines
Also consider
- GP bucket for general-purpose daily work
- Skeleton (rock sieve) bucket if you need to separate fines from rock
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA Attachments in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
Berlon Skid Steer Log Grapple
Standard FlowBerlon Industries manufactures a Canadian-made log grapple for skid steers. Alberta-built...
View product →
Bobcat 4K Heavy Duty Pallet Fork with 48-Inch Tines
The Bobcat 4K Heavy Duty Pallet Fork is a 4,000 lb rated OEM attachment with 48-inch tines...
View product →More from HLA Attachments
HLA 14 Inch Skid Steer Auger Bit
High FlowHLA Attachments' 14-inch auger bit is for foundation piers and larger post installations....
View product → HLA 16 Inch Skid Steer Auger Bit
High FlowThe 16-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product → HLA 18 Inch Skid Steer Auger Bit
High FlowHLA Attachments' 18-inch auger bit is a large-diameter bit for deep foundation piers and...
View product → HLA 6 Inch Skid Steer Auger Bit
High FlowHLA Attachments manufactures a 6-inch auger bit for use with HLA auger drives on skid...
View product →✓ Last checked: March 2026