Berlon High Capacity Snow Bucket 84 Inch
Overview
Berlon's High Capacity Snow Bucket is a heavy-gauge snow bucket with welded safety steps and side cutter option. Available in 72, 78, 84, 96, and 102-inch widths. The 84-inch model is stocked by Langner Equipment in Canada at approximately $3,200. Berlon is well-regarded in the Canadian commercial snow market for large-capacity buckets that fit standard skid steer quick attach. The cutout back plate improves cab visibility while moving snow.
Canada Availability
Compare with: Berlon 84-Inch GP Bucket for Skid Steers · Berlon 96-Inch General Purpose Bucket for Large Skid Steers · Berlon 72-Inch Heavy-Duty Smooth-Edge Skid Steer Bucket
Key Facts
- Working width: 84 inches (also: 72", 78", 96", 102")
- Type: high-capacity snow bucket
- Welded safety steps
- Optional side cutters
- Heavy-gauge steel construction
- Cutout back plate for visibility
- SSQA universal quick attach
- Typical weight: 520–680 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
- You want more cubic yards per pass without exceeding your machine's weight limit
Skip if
- Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
- You need a bucket that doubles for digging or grading
Also consider
- GP bucket if you split time between light and heavy material
- Snow pusher if snow moving is your primary winter task
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Berlon in Canada
Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
TMG Industrial 66 Inch Grapple Bucket
Standard FlowThe 66-inch-inch grapple handles logs, brush, rocks, scrap, and demolition debris on...
View product →
HLA Rail Type Pallet Forks 48-Inch 7500 lb Skid Steer
HLA's 7,500 lb capacity rail-style pallet fork is built for the heaviest skid steer...
View product →More from Berlon
Berlon Industries 72-Inch Angle Broom for Skid Steers
Standard FlowBerlon Industries' 72-inch angle broom is a Canadian-made hydraulic sweeping attachment...
View product → Berlon Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Berlon Industries Skid Steer Auger Drive Unit
Standard FlowBerlon Industries' hydraulic auger drive for skid steers is a Canadian-made drive unit...
View product →
Berlon Industries Skid Steer Cement Mixer
Standard FlowBerlon Industries' skid steer cement mixer is a Canadian-made hydraulic drum mixer for...
View product →✓ Last checked: March 2026