Yanmar TL80VS Attachment Guide — What Fits, What Flows, What Works
The Yanmar TL80VS is a mid-to-large vertical-lift CTL with 2,900 lbs rated operating capacity and a 34.3 GPM high-flow output that opens the door to mid-class mulchers and cold planers. Here's exactly what it can run and which attachment sizes fit this machine best.
Based on published Yanmar manufacturer specifications, universal SSQA coupler standards, and Canadian dealer context (Yanmar dealer network in Canada). Written for Canadian operators evaluating attachments for the Yanmar TL80VS. Not a dealer — no inventory verification. Last reviewed: 2026-03-17 by Skid Steer Attachments Canada.
Quick Fit Answer
Start with capacity, hydraulic flow, and coupler fit before comparing attachment brands.
Use this for attachment weight plus payload.
Primary number for augers, grapples, brooms, and most buckets.
Confirm the option is installed before buying high-flow attachments.
Mechanical fit still needs hydraulic and weight checks.
Yanmar TL80VS Machine Specs
The TL80VS sits at the upper-mid range of Yanmar's TL-series compact track loader lineup. Its vertical-lift path makes it well-suited for construction loading and land clearing applications where reaching over truck sides and stockpile walls matters. At 2,900 lbs rated operating capacity, it comfortably handles heavy attachments like large grapples and forestry mulchers.
Yanmar TL80VS — Factory Specifications
Hydraulic Flow Deep-Dive: Why 34.3 GPM Matters
The TL80VS's high-flow output of 34.3 GPM is a meaningful step up from the TL75VS (26.7 GPM HF) — and that difference matters when selecting attachments. Here's the practical breakdown:
Standard Flow: 24.7 GPM
At 24.7 GPM, the TL80VS's standard flow output is higher than many competitors at this size class (the Bobcat S650, for instance, runs 21.4 GPM standard). This means the TL80VS handles standard-flow attachments like augers, power rakes, brooms, grapples, and cement mixers with headroom to spare. You're unlikely to run into starved-flow performance issues on any standard-flow attachment.
High Flow: 34.3 GPM — What It Unlocks
34.3 GPM is the sweet spot for a mid-class mulcher. Most entry-to-mid forestry mulcher heads are rated for 28–35 GPM — the TL80VS HF sits squarely in that range. Practically, this means:
- Forestry mulchers (light to mid-class): Mulchers rated 28–34 GPM are a direct match. Expect full-rated rotor speed and good mulching performance on brush, small hardwood, and softwood stems up to 6–8" diameter depending on species.
- Cold planers (entry-to-mid class): Light cold planers typically require 28–35 GPM. The TL80VS HF can run 12–18" cold planer heads for asphalt repair and shoulder work.
- Heavy rotary cutters / flail mowers: Commercial rotary cutters rated at 28–34 GPM run at full capacity. Heavy-duty commercial flail mowers in the 25–35 GPM range are compatible.
- Snow blowers: Most hydraulic snow blowers require 25–40 GPM. The TL80VS HF covers the mid-range of snow blower products comfortably.
- Very large mulchers (40+ GPM): The highest-demand forestry mulchers — those requiring 38–45 GPM — are better matched to the TL100VS. The TL80VS HF is not the right machine for large-diameter commercial forestry mulching.
Quick-Attach Compatibility
The TL80VS uses the Universal Skid Steer Quick Attach (SSQA) standard — the same mounting system used by Bobcat, Case, Cat, Kubota, John Deere, Takeuchi, and virtually every other major brand. This is the most important compatibility fact for Canadian buyers:
- Any SSQA-plated attachment fits directly — no adapter needed. If a third-party attachment is labelled "universal skid steer" or "SSQA compatible," it mounts to the TL80VS without modification.
- Canadian suppliers like HLA Attachments (Listowel, ON), Virnig, Blue Diamond, TMG, and Paladin all build to SSQA spec and are fully compatible.
- Used attachments from any brand (Bobcat, Case, Cat, Kubota, etc.) with SSQA plates will mount directly to the TL80VS.
- The manual pin-engagement coupler is standard. The hydraulic quick-attach option (in-cab release) is available on the TL100VS — not on the TL80VS.
Full Compatibility Matrix
Standard flow = 24.7 GPM. High flow = 34.3 GPM (if equipped).
Standard Flow (24.7 GPM) — No High-Flow Kit Required
| Attachment | Compatibility | Notes |
|---|---|---|
| GP Buckets (dirt, gravel, rock) | ✅ YES | 68–78" optimal for this frame; see widths section |
| Pallet Forks | ✅ YES | 2,900 lb ROC; 48" forks standard; handles building materials and farm supply pallets easily |
| Bale Spears | ✅ YES | Single and double spear; handles large round and square bales |
| Auger Drives | ✅ YES | Up to 24" bits in most soil types; standard-flow auger drives are a strong match |
| Dozer / Angle Blades | ✅ YES | 84–96" optimal; vertical lift helps maintain grade at reach |
| Grapples (root, rock, brush) | ✅ YES | 60–72" widths work well at this ROC; strong choice for land clearing and site prep |
| Snow Pushers (box blades) | ✅ YES | 10'–12' optimal; no hydraulics required on pushers |
| Power Rakes / Landscape Rakes | ✅ YES | Hydraulic models run within 24.7 GPM with ease |
| Landplanes / Box Blades | ✅ YES | 84–96" typical; passive attachment, no flow required |
| Post Drivers (hydraulic) | ✅ YES | Standard-flow post drivers run well within 24.7 GPM |
| Cement / Concrete Mixers | ✅ YES | Most drum mixers run 10–18 GPM; well within std flow range |
| Sweepers (angle brooms) | ✅ YES | Hydraulic brooms typically 12–18 GPM |
| Trenchers (std flow models) | ✅ YES | Standard chain trenchers in most soil types; verify attachment weight vs ROC |
| Hydraulic Breakers (medium) | ✅ YES | Mid-size breakers run 12–22 GPM; check manufacturer's spec sheet |
| Backhoe Attachments | ✅ YES | Mid-size backhoe attachments; verify weight vs 2,900 lb ROC |
| Stump Grinders (std flow) | ✅ YES | Some standard-flow stump grinders operate in the 20–25 GPM range; check spec and weight |
High-Flow Required (34.3 GPM) — Needs HF Option Installed
| Attachment | Compatibility | Notes |
|---|---|---|
| Forestry Mulchers (light to mid-class) | HF REQUIRED | Mulchers rated 28–34 GPM are a strong match for TL80VS HF at 34.3 GPM. Brush, scrub, and small hardwood/softwood up to ~8" diameter. Very large mulchers (40+ GPM) exceed this machine's capacity. |
| Cold Planers (entry to mid-class) | HF REQUIRED | 12–18" cold planer heads rated 28–35 GPM work well. Good for asphalt repair, shoulder regrading, and light infrastructure work. |
| Snow Blowers (hydraulic) | HF REQUIRED | Mid-class snow blowers (25–35 GPM) are well-matched. Check manufacturer's minimum flow before selecting a model. |
| Heavy Rotary Cutters / Brush Cutters | HF REQUIRED | Commercial-grade rotary and brush cutters rated 28–34 GPM run at full capacity. Strong choice for heavy roadside and right-of-way vegetation management. |
| Heavy Flail Mowers | HF REQUIRED | Commercial flail mowers rated 25–35 GPM are well-matched to the TL80VS HF output. |
| Soil Conditioners / Tillers | HF REQUIRED | High-output tiller heads typically need 25–38 GPM. TL80VS HF is well-positioned for mid-class models. |
| Hydraulic Breakers (large class) | HF REQUIRED | Large breakers (750+ ft-lb) typically need 25+ GPM and higher pressure. Verify flow and pressure spec against machine output. |
Weight-Limited — Check Against 2,900 lb ROC
| Attachment | Compatibility | Weight Guidance |
|---|---|---|
| Commercial Stump Grinders | CHECK WEIGHT | Commercial stump grinders range 1,800–3,500 lbs. The TL80VS ROC at 2,900 lbs means heavy commercial units may be tight. Verify attachment weight before purchase. |
| Heavy Trenchers | CHECK WEIGHT | Rock-chain and wide-boom trenchers can approach 2,500–3,000 lbs. Confirm attachment weight and operating weight at full dig depth. |
| Large Forestry Mulchers | CHECK WEIGHT | Large mulcher heads can weigh 2,000–3,500 lbs. Even where flow is sufficient, verify attachment weight vs TL80VS ROC. May also exceed 34.3 GPM flow capacity. |
Recommended Attachment Widths for the TL80VS
The TL80VS's 9,610 lb operating weight and 2,900 lb ROC place it in the large-frame CTL category. Attachment widths can be sized up accordingly versus smaller machines.
Buckets
Snow Pushers
Dozer / Angle Blades
Grapples
Power Rakes
Mulchers
Top Attachment Choices for TL80VS Owners
Grapples — Land Clearing & Construction
The TL80VS is a strong land-clearing machine, and a root grapple or brush grapple is often the first attachment Canadian operators pair with it. At 2,900 lbs ROC and with vertical lift, the TL80VS handles large brush piles and root balls efficiently. Look for 60–72" widths from Canadian suppliers like HLA Attachments (Listowel, ON) or TMG Industrial.
Mulchers — With High Flow
With 34.3 GPM high flow, the TL80VS can run mid-class drum and disc mulchers rated for 28–34 GPM. This covers a wide range of Canadian land-clearing applications: farm woodlot thinning, right-of-way clearing, pipeline corridor work, and brushy site prep. Operators clearing heavy commercial timber with large-diameter stems should compare against the TL100VS.
Buckets — Construction & Grading
The vertical lift path shines when loading trucks or stockpiling over height. A 72–78" GP bucket in the 2/3 cu yd range is a natural fit. For rock and demolition debris, a 68–72" rock bucket with AR400 wear plate gives longevity in abrasive conditions.
Cold Planers — Pavement Work
The TL80VS with high flow is a capable machine for light infrastructure pavement work. Entry-to-mid cold planer heads (12–18") rated 28–35 GPM match the machine's HF output for asphalt removal and utility trench backfill compaction. A practical choice for municipal contractors and road crews operating across Canadian provinces.
Snow Pushers — Commercial Snow Management
At nearly 10,000 lbs of operating weight, the TL80VS pushes snow with authority. A 10'–12' snow pusher is the most common pairing for commercial parking lot and municipal sidewalk/pathway work. The vertical lift helps when stacking snow into windrows at the end of runs.
Yanmar Dealer Network in Canada
Yanmar's Canadian compact equipment dealer network is smaller than Bobcat, Cat, or John Deere — but it's growing. A few practical notes for Canadian TL80VS owners:
- Dealer density: Yanmar Compact Equipment (YCE) dealers are present in most major markets (Greater Vancouver, Calgary, Edmonton, Winnipeg, GTA, Ottawa, Halifax) but rural and northern operators may face longer drives to the nearest authorized dealer.
- Parts lead times: For common wear parts, Canadian dealer stock is generally adequate. For major hydraulic components and less common items, some Canadian dealers report 1–3 week lead times on special-order parts versus same-day availability at Bobcat or Cat dealers in the same market.
- Warranty: Yanmar TL-series machines carry a 2-year/2,000-hour warranty. Ensure your purchasing dealer is an authorized YCE service centre to maintain warranty coverage.
- Attachment service: Because the TL80VS uses universal SSQA, any competent attachment shop in Canada — regardless of Yanmar affiliation — can service and repair your attachments.
- Growing network: Yanmar has been actively expanding its YCE dealer footprint in Canada since 2024. Check the Yanmar Compact Equipment dealer locator for current coverage in your area.
Yanmar TL80VS Buyer FAQ
Can a Yanmar TL80VS run a mulcher?
Yes, with the optional high-flow system installed. The TL80VS reaches 34.3 GPM in high-flow configuration, which is a strong match for mid-class mulchers rated 28–34 GPM. At 2,900 lb ROC, the TL80VS can also carry large mulcher heads. Very large mulchers requiring 38–45+ GPM may not reach full rotor speed.
What bucket width is right for a Yanmar TL80VS?
A 68–78" bucket is optimal for the TL80VS. At 2,900 lbs rated operating capacity, this mid-to-large vertical-lift CTL handles dense construction and agricultural material confidently in that range. The vertical lift path gives the TL80VS excellent reach height for loading trucks and bins.
Does the Yanmar TL80VS use standard SSQA quick attach?
Yes — the Yanmar TL80VS uses the Universal Skid Steer Quick Attach (SSQA) standard. Any SSQA-plated attachment from any major brand mounts directly without an adapter plate, giving TL80VS owners full access to Canada's used and new attachment market.
Are Yanmar CTLs sold in Canada?
Yes — Yanmar CTLs including the TL80VS are available in Canada through Yanmar's dealer network. Yanmar has Canadian dealer representation primarily through ag and equipment dealers in Ontario, Quebec, and western Canada. The TL80VS's Yanmar diesel engine benefits from Yanmar's strong parts network across Canadian agriculture markets.
Work from the TL80VS's practical mid-CTL base
The TL80VS handles standard-flow attachment work well — buckets, grapples, and snow pushers are the natural starting point. If the machine has the optional high-flow system at 34.3 GPM, that opens mulchers and soil conditioners as a next step.