Bobcat S750 Attachment Guide — What Fits, What Flows, What Works
The Bobcat S750 is a large SSL built for heavy work — 3,200 lb ROC and 40 GPM high flow puts it in the class with the biggest attachments available: large forestry mulchers, industrial cold planers, heavy rock buckets, and commercial snow pushers. Here's exactly what it can run and how to match attachments to this machine's class.
Based on published Bobcat manufacturer specifications, Bob-Tach (SSQA-compatible with adapter) coupler standards, and Canadian dealer context (Bobcat Canada's national dealer network). Written for Canadian operators evaluating attachments for the Bobcat S750. Not a dealer — no inventory verification. Last reviewed: 2026-03-17 by Skid Steer Attachments Canada.
Quick Fit Answer
Start with capacity, hydraulic flow, and coupler fit before comparing attachment brands.
Use this for attachment weight plus payload.
Primary number for augers, grapples, brooms, and most buckets.
Confirm the option is installed before buying high-flow attachments.
Mechanical fit still needs hydraulic and weight checks.
Bobcat S750 Machine Specs
The S750 is Bobcat's large-frame skid steer — the heavy-work machine in the wheeled Bobcat lineup. At 3,200 lb ROC and 40 GPM high flow, it competes directly with the largest skid steer attachments on the market. The vertical lift arm and large Bob-Tach frame are built for loading trucks, running large buckets, and powering demanding hydraulic tools.
Bobcat S750 — Factory Specifications
Bob-Tach Coupler Notes
The S750 uses Bobcat's Bob-Tach quick attach system. Bob-Tach coupler geometry is physically identical to the industry-standard SSQA (Standard Skid Steer Quick Attach):
- Universal SSQA attachments fit directly — any attachment marked "universal fit" or "SSQA compatible" mounts without an adapter
- Bob-Tach branded attachments fit natively
- No proprietary adapter needed for standard third-party Canadian suppliers — HLA Attachments (Ontario), Virnig, CID, McMillan, Paladin, Bobcat brand all fit directly
- Large frame size matters: The S750 uses a large-frame Bob-Tach plate. Confirm attachment skid steer plate size (large frame vs small/mid frame) when ordering attachments designed for specific machine sizes
Hydraulic Flow Summary
| Mode | Flow (GPM) | Runs |
|---|---|---|
| Standard Flow | 26.5 GPM | Buckets, forks, augers, grapples, breakers, brooms, landplanes, trenchers, concrete mixers, post drivers, snow pushers, power rakes, sweepers — all standard-flow attachment types |
| High Flow | 40.0 GPM | Large forestry mulchers, industrial cold planers, commercial snowblowers, soil conditioners, flail mowers, rotary cutters, large stump grinders — the full range of large-class high-flow tools |
Full Compatibility Matrix
Standard flow = 26.5 GPM. High flow = 40.0 GPM (if equipped). ROC = 3,200 lbs — this machine can handle virtually all attachment weight classes.
✅ Standard Flow — Runs on All S750 Units (26.5 GPM)
| Attachment | Compatibility | Notes |
|---|---|---|
| GP Buckets (dirt, gravel, rock) | ✅ Standard Flow | 72–84" optimal; 96" possible on light material. 3,200 lb ROC supports full loads in heavy material |
| Rock Buckets (AR plate) | ✅ Standard Flow | Heavy rock buckets well within ROC — the S750's 3,200 lb capacity handles heavy plate buckets plus payload comfortably |
| Pallet Forks | ✅ Standard Flow | 3,200 lb ROC handles heavy pallet loads — lumber, block, pipe. 48–60" forks for large-frame work |
| Bale Spears | ✅ Standard Flow | Handles large round bales with ease; single and double spear configurations |
| Auger Drives (std flow) | ✅ Standard Flow | Standard-flow auger drives; 26.5 GPM handles large-diameter bits comfortably |
| Dozer / Angle Blades | ✅ Standard Flow | 96–108" optimal for S750 frame; heavy-duty blades well within ROC |
| Grapples (root, rock, brush) | ✅ Standard Flow | 66–84" widths work well; large grapple + heavy load still within 3,200 lb ROC |
| Snow Pushers (box blades) | ✅ Standard Flow | 12'–16' optimal; 3,200 lb ROC and 90 hp engine support large pusher blades in heavy snow |
| Power Rakes / Landscape Rakes | ✅ Standard Flow | 84–96" widths typical for large-frame machine |
| Landplanes / Box Blades | ✅ Standard Flow | 96–108" typical; passive attachment, no flow required |
| Sweepers (angle brooms) | ✅ Standard Flow | 84–96" optimal; commercial sweepers run well at 26.5 GPM std flow |
| Post Drivers | ✅ Standard Flow | Heavy-duty post drivers work well on S750 std flow |
| Trenchers (heavy duty) | ✅ Standard Flow | Heavy commercial trenchers within ROC; rock chain models at 3,200 lb ROC are manageable |
| Hydraulic Breakers (large) | ✅ Standard Flow | Large breakers up to 30 GPM work at std flow; very large units benefit from HF |
| Backhoe Attachments (commercial) | ✅ Standard Flow | Full-size backhoe attachments; S750 ROC easily handles commercial backhoe frame weights |
| Cement / Concrete Mixers | ✅ Standard Flow | Large drum mixers 10–22 GPM; 26.5 GPM std flow handles all practical drum sizes |
✅ High Flow — Requires 40.0 GPM HF Option
| Attachment | Compatibility | Notes |
|---|---|---|
| Large Forestry Mulchers | ✅ High Flow | 40 GPM HF runs full-size commercial forestry mulchers. The S750 is one of the most capable wheeled SSL platforms for heavy mulching work |
| Industrial Snow Blowers | ✅ High Flow | Commercial snow blowers 30–40 GPM run at full rated performance. Common for municipal snow removal in AB and ON |
| Cold Planers (mid to large class) | ✅ High Flow | Industrial cold planers 30–40 GPM work at full performance. The S750 is appropriate for road maintenance and pavement work |
| Soil Conditioners (large) | ✅ High Flow | Large soil conditioner/tiller heads 28–38 GPM run at full rated capacity |
| Flail Mowers (commercial) | ✅ High Flow | Commercial flail mowers 25–38 GPM; 40 GPM HF delivers full rated power |
| Rotary Cutters / Brush Cutters (large) | ✅ High Flow | Large high-speed brush cutter motors 28–38 GPM; full performance on S750 HF |
| Commercial Stump Grinders | ✅ High Flow | Commercial stump grinders 28–38 GPM and 1,800–2,500 lb attachment weights are fully within S750 ROC and HF. Strong pairing |
| Large Hydraulic Breakers | ✅ High Flow | Very large breakers (30–40 GPM class) benefit from HF; S750's 3,200 lb ROC handles the heaviest breaker frame weights |
⚠️ Marginal — Check Application Carefully
| Attachment | Compatibility | Notes |
|---|---|---|
| Very Large Cold Planers (industrial class) | ⚠️ Marginal | Industrial cold planers designed for full-size motor graders or large CTLs may specify 45+ GPM. Verify the attachment's exact flow requirement against 40 GPM HF output |
| Extra-Wide Attachments (over 10 ft) in tight sites | ⚠️ Marginal | The S750 is a wheeled SSL — wide attachments in tight job sites reduce maneuverability. A CTL may suit tight BC/ON site work better despite lower flow |
Recommended Attachment Widths for the S750
The S750 is a large-frame machine. Its 3,200 lb ROC and 90 hp engine support wide attachments without the balance concerns that constrain smaller machines.
Buckets
Snow Pushers
Dozer / Angle Blades
Grapples
Power Rakes
Cold Planers
What to Avoid on the S750
The S750 is one of the most capable wheeled skid steers for heavy attachment work. There are few hard limits, but some application mismatches exist:
- Compact/residential job sites: The S750 is a large, heavy wheeled machine. It causes ground disturbance, can damage lawns and driveways, and may not fit in gates or tight access points. For residential and landscaping work, a smaller CTL is more appropriate.
- Industrial cold planers above 40 GPM: Some very large industrial planers specify 45+ GPM. Verify the attachment's exact minimum flow against the S750's 40 GPM HF output before purchasing.
- Running high-flow attachments without confirming HF equipment: A used S750 without the high-flow kit only delivers 26.5 GPM — not enough for mulchers, large snowblowers, or cold planers. Always verify HF status before pairing large-class attachments.
- Soft or sensitive ground: As a wheeled SSL, the S750 can cause significant turf damage and compaction on wet or soft ground. Operators in BC or Ontario working on soft residential or agricultural sites should consider a CTL platform instead.
Canadian Regional Context
Alberta — Oil Patch Corridor & Heavy Construction
The S750 is well-established in Alberta's oil and gas support sector — pipeline right-of-way clearing, industrial site prep, and heavy material handling. The combination of 3,200 lb ROC and 40 GPM HF makes it appropriate for oilfield site work where large equipment is the norm and attachment capability matters. Bobcat Canada has dealer and service presence in Calgary, Edmonton, Red Deer, and Grande Prairie.
British Columbia — Heavy Construction
BC's heavy construction sector in the Lower Mainland, Fraser Valley, and BC Interior uses large-frame wheeled skid steers like the S750 for grading, material handling, and heavy attachment work. Cold planers for municipal road maintenance are a common S750 pairing in BC. Bobcat Canada has BC dealer coverage in the Lower Mainland, Vancouver Island, and Prince George area.
Ontario — Municipal & Commercial Snow Removal
The S750 is a commercial snow management machine in Ontario — large snow pushers (14'–16') and commercial snowblowers paired with the S750 are standard equipment for municipal and commercial snow contracts in the Greater Toronto Area, Ottawa, and Southwestern Ontario. The machine's 90 hp, 3,200 lb ROC, and 40 GPM HF output handles heavy Ontario snow seasons and large parking lot operations. Bobcat Canada has strong Ontario dealer presence across the province.
Bobcat S750 Buyer FAQ
Can a Bobcat S750 run a large forestry mulcher or cold planer?
Yes. With the high-flow option, the S750 delivers 40.0 GPM — one of the highest outputs in its class — which is sufficient for virtually all commercial forestry mulchers and industrial cold planers on the market. Verify the machine is equipped with the HF kit before purchasing high-flow attachments, as it was optional rather than standard.
What bucket size is best for a Bobcat S750?
A 72–80" general-purpose bucket matches the S750's 3,200 lb ROC and large frame well. For heavy rock or demolition material, a 72" heavy-duty bucket keeps loaded weight within capacity. The S750's large frame supports up to 84" in light material on open sites.
Does the Bobcat S750 use Bob-Tach or universal SSQA?
The S750 uses Bob-Tach, Bobcat's proprietary quick-attach system. A Bob-Tach-to-SSQA adapter is needed for universal SSQA third-party attachments; Bob-Tach branded attachments mount directly. At the S750's large frame class, confirm attachment weight ratings are appropriate for a 3,200 lb ROC machine.
Is the Bobcat S750 a good machine for large-scale Alberta or Saskatchewan farm and forestry work?
Yes. The S750's 3,200 lb ROC, 90 hp engine, and 40 GPM high-flow output make it one of the most capable wheeled skid steers for demanding Prairie farm and Western Canadian forestry applications. It can handle large round bales, commercial snow blowers for farmyard clearing, and brush management attachments that smaller machines cannot run.
The S750 Is Built for Heavy Attachment Work
With 3,200 lb ROC and 40 GPM high flow, the S750 can run the full range of large-class attachments. Browse the catalog for commercial mulchers, large snow pushers, cold planers, and more.