John Deere Worksite Pro RC108L Rotary Cutter
Overview
The RC108L is John Deere's 108-inch (9-foot) high-flow rotary cutter in the Worksite Pro L-series — the widest model in the lineup and designed for the largest skid steers and CTLs doing commercial mowing, large field maintenance, and utility right-of-way work. At 9 feet, operators can cover substantial acreage quickly, which matters for municipalities, rural road departments, and large Canadian farm operations maintaining ditches and field edges. As with all L-series rotary cutters, the free-swinging blade design protects against rock and obstacle strikes. High-flow required — not suitable for standard-flow machines.
Canada Availability
Best for: large field maintenance, utility rights-of-way, municipal ditch mowing
Compare with: Bobcat 96-Inch Rotary Cutter for Skid Steers · HLA 108-Inch Brush Cutter for Large Skid Steers · HLA 96-Inch Brush Cutter for Large Skid Steers
Key Facts
- Cutting width: 108 inches (9 feet)
- Drive: high-flow hydraulic — verify GPM with your dealer
- Blade type: free-swinging blades (L-series) — protects against rock strikes
- Application: large field maintenance, utility rights-of-way, municipal ditch mowing
- High-flow required — not suitable for standard-flow machines
- SSQA (universal quick attach) mount
- Compatible with large-frame John Deere high-flow skid steers and CTLs
Is This Right For You?
Buy if
- Your skid steer runs 25+ GPM high-flow hydraulics and you need maximum cutting power for heavy brush
- You're land clearing or maintaining overgrown acreage where standard-flow cutters bog down
- ROI matters — a high-flow cutter clears more per hour than a standard model on the right machine
Skip if
- Your machine doesn't have high-flow — you'll get no performance benefit and may damage fittings
- You're doing light grass cutting — standard flow is sufficient and the attachment costs less
Also consider
- Standard rotary cutter if your machine doesn't have high-flow auxiliary
- Brush mulcher/forestry mulcher if you need to process material over 4 inches diameter
Compatible with compact track loaders and large-frame skid steers (S750+ class). Verify your machine's rated operating capacity (ROC) before ordering.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect blade tips or flail hammers for wear after each use — dull cutting edges increase engine load and reduce cut quality significantly
- Check all blade bolts for proper torque before every use — loose blades on a high-RPM rotary cutter are a serious safety hazard
- Grease deck spindle bearings after every 8 hours of operation — spindle bearing failure is the most common and expensive rotary cutter repair
- Check the belt drive or hydraulic motor for overheating signs (excessive heat, smell) after extended cutting sessions in dense material
- Remove wrapped material (wire, twine, root) from around the rotor shaft after every use — wrapped material cuts through shaft seals and causes bearing contamination
How to Connect
- Attach rotary cutter frame using Bob-Tach
- Connect hydraulic couplers for motor
- Test blade rotation direction before cutting
- Keep 50m+ clear of bystanders — blade tip speed is extremely high
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from John Deere
John Deere Worksite Pro 4-in-1 Combination Bucket
Standard FlowJohn Deere's Worksite Pro 4-in-1 bucket is a hydraulic combination attachment for John...
View product →
John Deere AB60B 60 Inch Skid Steer Angle Broom
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → John Deere AB72B 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026