John Deere PR96B Power Rake
Overview
The John Deere PR96B is a 96-inch hydraulic power rake in the Worksite Pro attachment line. Designed for large-scale seedbed preparation, site grading, and lawn renovation on commercial and residential properties. The wider 96-inch rotor improves production rate significantly compared to 72-inch models on open areas. Available in Canada through Brandt, the national John Deere Worksite Pro distributor.
Canada Availability
Best for: seedbed prep, lawn renovation, site grading
Compare with: Berlon 96 Inch Skid Steer Power Rake · Blue Diamond 84-Inch Skid Steer Power Rake · Blue Diamond 90-Inch Power Rake for Skid Steers
Key Facts
- Model: PR96B
- Working width: 96 inches
- Brand: John Deere Worksite Pro
- Drive: hydraulic rotor
- Application: seedbed prep, lawn renovation, site grading
- Compatible: large-frame John Deere skid steers and CTLs
- John Deere quick attach mount
- Weight: 800–2400 lbs
- Hydraulic flow: 15–30 GPM
Is This Right For You?
Buy if
- You prep lawns, subdivision lots, or acreage for seeding — power rakes clear debris and till in one pass
- Spring cleanup or post-construction site restoration is a regular part of your work
- You need to remove rocks, sticks, and surface debris while grading to a final seed-ready surface
Skip if
- Heavy clay, packed gravel, or compacted subsoil is your main challenge — a soil conditioner tills deeper
- You're doing large-scale tillage — a rototiller covers more depth per pass on agricultural ground
Also consider
- Soil conditioner for deeper tilling on compacted or clay-heavy ground
- Landscape rake for light debris cleanup without tine-tilling
Designed for John Deere machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect rotor teeth after each use — chipped or missing carbide dramatically reduces grading quality and throws the rotor off balance
- Grease rotor shaft bearing housings at each end after every 8 hours of use — most premature bearing failures trace back to insufficient lubrication intervals
- Clean packed soil from rotor teeth and the housing after every job — built-up soil throws the rotor out of balance and restricts rotation
- Replace worn teeth in matched sets — mixing old and new teeth across the rotor causes uneven cutting and vibration that stresses the drive
- Inspect hydraulic motor drive connections and belt tension (if belt-driven) weekly during active season
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic rotor circuit
- Adjust rotor depth by lowering carefully — engage at surface before penetrating soil
- Set material deflector angle if applicable
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from John Deere
John Deere Worksite Pro 4-in-1 Combination Bucket
Standard FlowJohn Deere's Worksite Pro 4-in-1 bucket is a hydraulic combination attachment for John...
View product →
John Deere AB60B 60 Inch Skid Steer Angle Broom
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → John Deere AB72B 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026